James Marrow: List of publications

Showing 1 to 237 of 237 publications
show filters

3D finite element modeling of water diffusion behavior of jute/PLA composite based on X-ray computed tomography

In-situ X-ray tomography of wear - A feasibility study

A method for fracture toughness measurement in trabecular bone using computed tomography, image correlation and finite element methods.

In situ measurement of elastic and total strains during ambient and high temperature deformation of a polygranular graphite

A 3D full-field study of cracks in a nuclear graphite under mode I and mode II cyclic dwell loading conditions

Unifying the effects of in and out-of-plane constraint on the fracture of ductile materials

J-Integral analysis: An EDXD and DIC comparative study for a fatigue crack

Measuring the brittle-to-ductile transition temperature of tungsten-tantalum alloy using chevron-notched micro-cantilevers

Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes.

Characterisation of slip and twin activity using digital image correlation and crystal plasticity finite element simulation: Application to orthorhombic α-uranium

Procedure for accurate calculation of the J-integral from digital volume correlation displacement data

Sodium/Na β″ Alumina Interface: Effect of Pressure on Voids.

Fatigue crack closure: A myth or a misconception?

A new method for predicting susceptibility of austenitic stainless steels to intergranular stress corrosion cracking

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells.

Evaluation of Fracture Toughness Measurements Using Chevron-Notched Silicon and Tungsten Microcantilevers

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Validating 3D two-parameter fracture mechanics models for structural integrity assessments

Application of Neutron Imaging to Detect and Quantify Fatigue Cracking

Structure and flexural properties of 3D needled carbon fiber reinforced carbon and silicon carbide (C/C-SiC) composites fabricated by gaseous and liquid silicon infiltration

Computed tomography porosity and spherical indentation for determining cortical bone millimetre-scale mechanical properties

Validating 3D two-parameter fracture mechanics for structural integrity assessments

Hygrothermal aging and structural damage of a jute/poly (lactic acid) (PLA) composite observed by X-ray tomography

In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite

Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation

In situ mapping of normal strains in the field of a growing fatigue crack in a steel weld using digital image correlation and energy dispersive synchrotron X-ray diffraction

Lattice strain and texture development in coarse-grained uranium – a neutron diffraction study

Data related to the mesoscopic structure of iso-graphite for nuclear applications.

In situ Observation of Compression Damage in a Three-Dimensional Braided Carbon Fiber Reinforced Carbon and Silicon Carbide (C/C-SiC) Ceramic Composite.

Mesoscopic structure features in synthetic graphite

3D Cellular Automata fracture model for porous graphite microstructures

Observation of crack growth in a polycrystalline ferroelectric by synchrotron X-ray diffraction.

Synchrotron X-ray characterization of crack strain fields in polygranular graphite

A multi-scale three-dimensional Cellular Automata fracture model of radiolytically oxidised nuclear graphite

An autonomous surface discontinuity detection and quantification method by digital image correlation and phase congruency

J-Integral Calculation by Finite Element Processing of Measured Full-Field Surface Displacements

Three-dimensional measurement and cohesive element modelling of deformation and damage in a 2.5-dimensional woven ceramic matrix composite

3D characterization and modelling of damage development in a nuclear grade SiC/SiC ceramic composite

Femme 3D multiscale fracture model: Application to the degradation and damage of nuclear materials

Full-field characterisation of the stress concentration of blocked twins by high-resolution EBSD in alpha-uranium

In situ mechancial testing of nuclear graphite at elevated temperatrues: Synchrotron X-ray tomography, neutron diffraction and Raman scattering

In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete

Three dimensional characterization and multi-scale modelling of damage in natural biomaterials

In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite

Multifractal-based assessment of Gilsocarbon graphite microstructures

Quantifying yield behaviour in metals by X-ray nanotomography.

Multi-scale damage modelling in a ceramic matrix composite using a finite-element microstructure meshfree methodology.

Effect of surface machining on intergranular stress corrosion cracking (IGSCC) in sensitised type 304 austenitic stainless steel

Multi-scale modelling of nuclear graphite tensile strength using the site-bond lattice model

Three-dimensional displacement mapping of diffused Pt thermal barrier coatings via synchrotron X-ray computed tomography and digital volume correlation

Porosity characterization of fiber-reinforced ceramic matrix composite using synchrotron X-ray computed tomography

Observation and simulation of indentation damage in a SiC-SiCfibre ceramic matrix composite

Time-resolved synchrotron tomographic quantification of deformation during indentation of an equiaxed semi-solid granular alloy

In situ measurement of the strains within a mechanically loaded polygranular graphite

Obtaining the J-integral by diffraction-based crack-field strain mapping

Plasma-sprayed thermal barrier coatings: numerical study on damage localization and evolution

Method for the explicit insertion of microstructure in Cellular Automata Finite Element (CAFE) models based on an irregular tetrahedral Finite Element mesh: Application in a multi-scale Finite Element Microstructure MEshfree framework (FEMME)

Method for the explicit insertion of microstructure in Cellular Automata Finite Element (CAFE) models based on an irregular tetrahedral Finite Element mesh: Application in a multi-scale Finite Element Microstructure MEshfree framework (FEMME)

Advanced 2D and 3D Digital Image Correlation of the Full-Field Displacements of Cracks and Defects

Multi-scale modeling of damage development in a thermal barrier coating

Influence of milling on the development of stress corrosion cracks in austenitic stainless steel

Synchrotron X-ray tomographic quantification of deformation induced strain localisation in semi-solid Al- 15wt.%Cu

Yield behavior beneath hardness indentations in ductile metals, measured by three-dimensional computed X-ray tomography and digital volume correlation

FEMME: A multi-scale Finite Element Microstructure MEshfree fracture model for quasi-brittle materials with complex microstructures

Time-resolved synchrotron tomographic quantification of deformation-induced flow in a semi-solid equiaxed dendritic Al-Cu alloy

In situ quantitative three-dimensional characterisation of sub-indentation cracking in polycrystalline alumina

In situ synchrotron tomographic quantification of granular and intragranular deformation during semi-solid compression of an equiaxed dendritic Al-Cu alloy

3D Cellular Automata Finite Element Method with Explicit Microstructure: Modeling Quasi-brittle Fracture using Meshfree Damage Propagation

3D Studies of Damage by Combined X-ray Tomography and Digital Volume Correlation

3D studies of indentation by combined X-ray tomography and digital volume correlation

A quantitative three-dimensional in situ study of a short fatigue crack in a magnesium alloy

Design, fabrication, characterization and simulation of PIP-SiC/SiC composites

FAFNIR: Strategy and risk reduction in accelerator driven neutron sources for fusion materials irradiation data

Fracture characterisation of reactor core graphite under biaxial loading

Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ

Reducing risk and accelerating delivery of a neutron source for fusion materials research

Studying SiC/SiC composites by X-ray tomography

Application of accelerator based neutron sources in fusion materials research

Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina

Editorial

Observation and quantification of three-dimensional crack propagation in poly-granular graphite

Three-dimensional crack observation, quantification and simulation in a quasi-brittle material

Flexural strength and defect behaviour of polygranular graphite under different states of stress

Characterisation of 3d fracture evolution in concrete using in-situ X-ray computed tomography testing and digital volume correlation

In situ observation of short fatigue crack propagation in oxygenated water at elevated temperature and pressure

Annealing of ion irradiation damage in nuclear graphite

Modelling damage in nuclear graphite

RICH TOMOGRAPHY TECHNIQUES FOR THE ANALYSIS OF MICROSTRUCTURE AND DEFORMATION

Fracture behaviour of an anisotropic polygranular graphite (PGA)

Intergranular crack nuclei in polycrystalline alumina

An approach to calculate the J-integral by digital image correlation displacement field measurement

Application of an independent parallel reactions model on the annealing kinetics of BEPO irradiated graphite

Detection and characterisation of intergranular stress-corrosion cracking on austenitic stainless steel

Quantitative in situ study of short crack propagation in polygranular graphite by digital image correlation

Effects of orientation, stress and exposure time on short intergranular stress corrosion crack behaviour in sensitised type 304 austenitic stainless steel

Observation and quantification of three-dimensional crack propagation in poly-granular graphite

A new approach for DL-EPR testing of thermo-mechanically processed austenitic stainless steel

Atmospheric-Induced Stress Corrosion Cracking of austenitic stainless steels under limited chloride supply

Observation of stress corrosion cracking in super duplex stainless steel (Zeron 100) using digital image correlation

An Evaluation of the Double Torsion Technique

The three-dimensional microstructure of polycrystalline materials unravelled by synchrotron light

Three-dimensional in situ observations of short fatigue crack growth in magnesium

A method for the 3-D quantification of bridging ligaments during crack propagation

Damage, crack growth and fracture characteristics of nuclear grade graphite using the Double Torsion technique

In situ observation of crack nuclei in poly-granular graphite under ring-on-ring equi-biaxial and flexural loading

In-situ observation and modelling of intergranular cracking in polycrystalline alumina

Influence of twins on short fatigue cracks in type 316L stainless steel

3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography

Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking

Three-dimensional in situ observations of short fatigue crack growth in magnesium

Mechanical properties and fracture of materials

Preliminary evaluation of digital image correlation for in-situ observation of low temperature atmospheric-induced chloride stress corrosion cracking in austenitic stainless steels

3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm

Nanotomography for understanding materials degradation

Grain tracking at the high energy materials science beamline of the Petra III synchrotron radiation source

Fracture behaviour of radiolytically oxidised reactor core graphites: a view

Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies

Characterisation of grain boundary cluster compactness in austenitic stainless steel

Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel

3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm

A Consideration of the Effect of Radiolytic Oxidation on Fracture Behaviour of Reactor Core Graphites

Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques

In-situ observation of damage nucleation in graphite under biaxial flexural loading

Intergranular crack nucleation in polycrystalline alumina

Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography

Preliminary evaluation of digital image correlation for in-situ observation of low temperature atmospheric-induced chloride stress corrosion cracking in austenitic stainless steels

The Location of Radioisotopes in British Experimental Pile Grade Zero Graphite Waste

Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies

Towards understanding the development of grain boundary clusters in austenitic stainless steel

Diffraction contrast tomography of polycrystalline alumina

Effect of surface finish on fatigue of stainless steels

Imaging autoclave development for in-situ optical measurement of high temperature aqueous corrosion processes

In-situ observation of damage mechanisms by digital image correlation during tension and low cycle fatigue of magnesium alloys

New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging

Got it cracked?

Five-parameter grain boundary analysis of a grain boundary-engineered austenitic stainless steel

In situ observation of intergranular crack nucleation in a grain boundary controlled austenitic stainless steel

Diffraction contrast tomography of polycrystalline alumina

Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis

Effect of strain path and annealing on development of resistance to intergranular degradation in austenitic stainless steels

3D modelling of intergranular stress corrosion cracking (IGSCC)

Cluster properties of sensitized grain boundaries in Type 304 stainless steel

Grain boundary engineering for crack bridging: A new model for intergranular stress corrosion crack (IGSCC) propagation

High-resolution, in-situ, tomographic observations of stress corrosion cracking

In-situ observation of crack nucleation in nuclear graphite by digital image correlation

In-situ observations of intergranular stress corrosion cracking

Influence of microstructure and stress on short intergranular stress corrosion crack growth in austenitic stainless steel type 304

New techniques for in-situ observations of crack growth behaviour

New techniques for intergranular stress corrosion crack observation

Application of an independent parallel reactions model on the annealing kinetics to irradiated graphite waste

Characterization of heterogeneity and nonlinearity in material properties of nuclear graphite using an inverse method

Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling

Microcracks in nuclear graphite and highly oriented pyrolytic graphite (HOPG)

Microstructural characterisation of nuclear grade graphite

Microstructural modelling of nuclear graphite using multi-phase models

Modelling the effects of surface finish on fatigue limit in austenitic stainless steels

Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite

Effect of thermomechanical process history on grain boundary control in an austenitic stainless steel

Observation of microstructure deformation and damage in nuclear graphite

Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal.

Preparation of fatigue specimens with controlled surface characteristics

The influence of low-strain thermo-mechanical processing on grain boundary network characteristics in type 304 austenitic stainless steel

X-ray diffraction contrast tomography: A novel technique for three-dimensional grain mapping of polycrystals. II. The combined case

Surface grain boundary engineering of shot-peened type 304 stainless steel

Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens

3D modelling of intergranular stress corrosion cracking (IGSCC)

Effect of strain path and annealing on development of resistance to intergranular degradation in austenitic stainless steels

Mesoscale mechanical model for intergranular stress corrosion cracking and implications for microstructure engineering

Nanostructures of carbon in nuclear graphite

Nanostructures of carbon in nuclear graphite

New techniques for intergranular stress corrosion crack observation

The microstructure of nuclear graphite binders

Rates of intergranular environment assisted cracking in three-dimensional model microstructures

Surface grain boundary engineering (GBE) of shot-peened type 304 stainless steel

Adaptive 3D algorithm to detect bridging ligaments during intergranular stress corrosion cracking of stainless steel

Crack propagation resistance and damage mechanisms in nuclear graphite

Modelling intergranular stress corrosion cracking in simulated three-dimensional microstructures

Observations of strain localisation and failure in nuclear graphite

Surface grain boundary engineering (GBE) of shot-peened type 304 stainless steel

X-ray tomographic observations applied to porosity models for the thermal properties of oxidised nuclear graphite

A three-dimensional computational model for intergranular cracking

Meso-scale mechanical model for intergranular stress corrosion cracking and implications for microstructure engineering

X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel

X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking

X-ray tomography observation of crack propagation in nuclear graphite

A two-dimensional mesoscale model for intergranular stress corrosion crack propagation

Numerical modelling of the effects of porosity changes on the mechanical properties of nuclear graphite

Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel

Measurement of crack bridging stresses in environment-assisted cracking of duplex stainless by synchrotron diffraction

In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction

Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications

Characterization of material properties using an inverse method

Crack propagation resistance and damage mechanisms in nuclear graphite

Effects of surface finish on the fatigue limit in austenitic stainless steels (modelling and experimental observations)

Environment-assisted cracking of high-strength magnesium alloys WE43-T6

Intergranular stress corrosion crack propagation in sensitised austenitic stainless steel (microstructure modelling and experimental observation)

Controlled initiation of short fatigue cracks in 316L steel

The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography

Controlled initiation of short fatigue cracks in 316L steel

The roles of microstructure and mechanics in intergranular stress corrosion cracking

Environment-assisted cracking of cast WE43-T6 magnesium

High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron

Research activities of the Nuclear Graphite Research Group - University of Manchester

Analysis of crack propagation in nuclear graphite using three-point bending of sandwiched specimens

Research activities of the Nuclear Graphite Research Group at the University of Manchester, UK

Fracturing of a defective plate under cyclic loading

Logging on to electron microscopy

Fatigue crack nuclei in austempered ductile cast iron

The internet microscope

Understanding the jominy end quench test

'Everlasting' cast copper coolers for the blast furnace

'Everlasting' cast copper coolers for the blast furnace

The internet microscope

Effect of Retained Austenite on Short Fatigue Cracks in Austempered Ductile Cast Iron (ADI)

Observation of Retained Austenite by Electron Backscatter Diffraction in Austempered Ductile Cast Iron (ADI)

Peerless probing into the micro world

Short fatigue cracks in austempered ductile cast iron (ADI)

Application of electron backscattered diffraction to cleavage fracture in duplex stainless steel

Fatigue of austempered ductile cast iron

Brittle fracture of duplex stainless steels.

The brittle fracture of 475°C embrittled cast duplex stainless steel

The crack initiation toughness for brittle fracture of super duplex stainless steel

High resolution fractography of hydrogen-assisted fracture in iron-3 wt% silicon

Hydrogen-assisted stable crack growth in iron-3 WT% silicon steel

The fracture mechanism in 475°C embrittled ferritic stainless steels

The fracture mechanism of 475°C embrittlement in a duplex stainless steel

TOUGHENING MECHANISMS IN THE HIGH-TEMPERATURE FRACTURE OF HIGH-PURITY ALUMINA

Fatigue crack propagation mechanisms in a thermally aged duplex stainless steel

In-situ scanning acoustic microscopy of crack bridging in alumina

In-situ scanning acoustic microscopy of crack bridging in alumina

Microstructural and environmental effects on fatigue crack propagation in duplex stainless steels

The brittle/ductile transition in cubic stabilised zirconia

The brittle/ductile transition in cubic stabilised zirconia

Toughening mechanisms in the high temperature fracture of high purity alumina

Scanning acoustic microscopy observations of high-temperature crack-bridging mechanisms in alumina

Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels

Effect of mean stress on hydrogen assisted fatique crack propagation in duplex stainless steel