Recent Acquisitions

Books added to the Library August - April 2013

• Aindow, m & Kiely, C. J. (eds), Electron microscopy and analysis 2001, IOP series no. 168, 05 IP 2001/ 168
• Ashby, Michael F., Jones, David R.H. Engineering Materials 2 :An introduction to microstructures and processing. – 4th edition, Butterowrth-Heinemann, 2013 50 ASH/5 Two copies one in the Library Office
• ASM Handbook, Vol 23 – Materials for medical devices, ASM, 2012. 04 ASM/23
• Bansal, Narottam P. & Boccaccini, Aldo R. (eds), Ceramics and composites processing methods, AMC/Wiley 2012. 44 BAN
• Bennett, Sarah , Ceramics for armour, Part II Thesis, 2010. 03 BEN/2 + cd-rom
• Bravman, John C., Anderson, Ron M. & McDonald, Michael L., Specimen preparation for transmission electron microscopy of materials MRS, 1988. 05 MRS 1987/115
• Bringans, R.D., Feenstra, R.M., Gibson, J.M. (eds), Atomic scale structure of interfacesMRS 1990. 05 MRS 1989/159
• Buscall, R., Corner, T. & Stageman, J.F. (eds), Polymer colloids, Elsevier Appllied Science, 1985. 45 BUS
• Buseck, Peter R., Cowley, John M., Eyring, Leroy (eds), High-resolution transmission electron microscopy and associated techniques
• OUP, 1988 32 BUS, Campbell, John Castings – (1st edition), Butterworh Heineman, 1993. 56 CAM
• Ching, Wai-Yim & Rulis, Paul, Electronic structure methods for complex materials OUP, 2012. 21 CHI/1
• Clarson, Stephen. J. … et al. (eds), Advances in silicones and silicone-modified materials. ACS, 2010. 45 CLA/1
• Clyne, T.W.(editor), Interfacial effects in particulate, fibrous and layered composite Materials. Trans Tech Publications, 1996. 45 CLY
• Cohen Addad, J. P (ed), Physical properties of polymeric gels. John Wiley & Sons, 1996 45 COH
• Craven, A.J. (ed). Electron microscopy and analysis 1993, IOP series no. 138. 05 IP 1993/138
• Cullis, A.G., Hutchison, J.L. (eds), Microscopy of semiconducting materials : Proceedings of the 14th Conference April 11-14, 2005, Oxford, UK Springer 2005. 05 IP/2005
• Dobson, P.J., Pendry, J.B. & Humphreys, C.J. (eds) Electron diffraction 1927-1977 Institute of Physics 1978. 05 IP 1977/41
• Ebnesajjad, Sian (ed). Handbook of biopolymers and biodegradable plastics Elsevier, 2013, 04-1 PDL/2
• Feng, Zhe Chuan (ed). Handbook of zinc oxide and related materials – 2 volumes CRC Press, 2013. 04-1 FEN
• Fraser, D.A. The Physics of semiconductor devices – 4th ed. 1986, Clarendon Press, 21 FRA/2
• Gangloff, Richard P. & Somerday, Brian (eds). Gaseous hydrogen embrittlement of materials in energy technologies vol.1 The Problem, its effects characterization and effects on particular alloy classedWoodhead Publishing, 2012, 60 GAB/a
• Gangloff, Richard P. & Somerday, Brian (eds). Gaseous hydrogen embrittlement of materials in energy technologies vol.2 Mechanisms, modeling and future developments Woodhead Publishing, 2012, 60 GAB/b
• Gibson, J.M. & Dawson, L.R. (eds). Layered structures, epitaxy, and interfaces. MRS Symposia vol 37, 05 MRS 1983/37
• Grassie, Norman, Scott, Gerald. Polymer degradation & stabilization. CUP, 1985 45 GRA
• Haslam, Henry. Semi-insulating silicon, Part II Thesis 2008, 03 HAS/1 + cd rom
• Humphrey, Caroline. Ageing of ceramic alloys. Part II Thesis, 2008. 03 HUM/6 + cd rom
• Khan, A.Q. … et al (eds). Advanced Materials -99 : Proceedings of the 6th International Symposium on Advanced Materials 19023rd September 1999. Islamabad, Pakistan, 05 AM/1999
• Knowles, K. (editior). Electron beam imaging of non-crystalline materials. Proceedings of a one-day meeting of the Electron Microscopy and Analysis Group of the Institute of Physics 3 February 1988 London IOP, 1988 05 IP/1988
• Kutz, Myer, (ed), Applied plastics engineering handbook : processing and materials, Elsevier, 2011. 04-1 PDL/1
• Lancaster, J.F. Metallurgy of welding -5th ed. Chapman & Hall, 1993. 56 LAN/A
• Lee, Yung-Li, Barkey, Mark E., Kang, Hong-Tae. Metal fatigue analysis handbook Elsevier, 2012, 04-1 LEE
• Liang, Z.X. & Zhao, T.S. (eds). Catalysts for alcohol-fuelled direct oxidation fuel cells. RSC Publishing, 2012. 60 LIA
• Malpass, Dennis B. & Band, Elliot I. Introduction to industrial polypropylene : properties, catalysts, processes. Scrivener/Wiley, 2012
• Marcus, Philippe (ed). Corrosion mechanisms in theory and practice – 3rd ed. CRC Press, 2011. 43 MAR McKeen, Laurence W. Permeability properties of plastics and elastomers 3rd. ed. Elsevier, 2012, 04-1 PDL
• NI, Na. Study of oxidation mechanisms of zirconium alloys by electron microscopy. DPhil thesis 2011. 03 NI
• Nwakwuo, Christopher Chinedu. Reactive hydride composites for efficient hydrogen energy storage. DPhil Thesis 2011. 03 NWA
• Parr, Robert G. & Wang, Weitao. Density-functinal theory of atoms and molecules OUP, 1989. 40 PAR
• Pedrazzini, Stella. Characterisation and mechanical properties of nanoquasicrystalline Al-Fe-Cr-Ti based composites. Part II, 2010. 03 PED/1 + cd-rom.
• Popov, Anatoly . Disordered semiconductors : physics and applications Pan Stanford Publishing, 2011. 21 POP
• Richards, B.P. & Footner, P.K. The role of microscopy in semiconductor failure analysis OUP, 1992. 21 RIC
• Santin, Matteo, Phillips, Gary J. (eds), Biomemetic, bioresponsive, and bioactive materials : An introduction to integrating materials with tissues. Wiley, 2012. 45 SAN
• Sharer Sahir, Zalilah. Investigation of protective mechanisms of organic coatings by thermal testing and electrochemical techniques. DPhil thesis 03 SHA/12
• Shaw, Montgomery T. Introduction to polymer rheology. Wiley, 2012. 45 SHA/3
• Shepherd, Daniel. Microelectronic wire bonds in long term exposure to harsh environments. Part II Thesis 2009. 03 SHE/7 + cd rom.
• Sinclair, Robert, Smith, David J., Dahmen, Ulrich (eds). High resolution electron microscopy of defects in materials. MRS Symposium proceedings v. 183. MRS, 1990. 05 MRS 1990 / 183
• Smallwood, Christo. The Electron spin properties of grapheme Part II Thesis, 2012 03 SMA/2 + cd rom
• Smith, David J. (ed)
• Atomic resolution microscopy of surfaces and interfaces. MRS Symposium Proceedings vol. 466. MRS, 1996. 05 MRS 1996/ 466
• Solid State Physics volume 63 2012. Elsevier, 2012 02 SSP/63
• Spence, John C.H. Experimental high-resolution electron microscopy. – 2nd ed. OUP, 1988 32 SPE/B
• Spence, John C.H. High-resolution electron microscopy. – 3rd ed. OUP, 2003 32 SPE/2
• Tendeloo, Gustaaf Van, Dyck, Dirk Van and Pennycook, Stephen J (eds). Handbook of Nanoscopy – 2 vols. Wiley 2012. 04-1 TEN Reference
• Theng, B.K.G. Formation and properties of clay=polymer complexes. 2nd. ed. Elsevier, 2012. 45 THE
• Thomas, Gareth. Advanced materials for plasma facing components in fusion devices. DPhil thesis 2009. 03 THO/5
• Van der Heide, Paul. X-ray photoelectron spectroscopy : an introduction to principles and practices. Wiley, 2012.
• Weertman, J.R. … et al (eds). Electron microscopy: it roles in materials science. The Mike Meshii Symposium. TMS 2003 05 TMS 2003/2
• Weltner, K. … et al. Mathematics for engineers and scientists. Stanley Thornyes (Publishing) Ltd, 1986 10 WEL/1
• Wong, Cheuk T. Transparent ultra-high barrier polymer films. Part II Thesis, 2011. 03 WON/1 + cd rom
• Zhang, Sam & Zhao, Dongliang (eds). Aerospace materials handbook CRC Press, 2013. 04-1 ZHA Reference

Books added to the Library 1 August 2012 - December 2012

• American Society for Metals, Vanadium structural steels :, Reprint of papers on Vanadium steels … …. , ASM 1983. 05 ASM 1983/2, Annual Review of Materials Research , v. 42 02 ARMR
• Balluffi, R.W. , Introduction to elasticity theory for crystal defects , CUP, 2012 30 BAL
• Benham, Judith L., Kinstle, James F. , Chemical reactions on polymers , ACS, 1988 45 BEN
• Bennett, S.B. & Bennett, M.J. (eds) , Microscopy of oxidation 2 Proceedings of the Second International , Conference on the Microscopy of Oxidation , IOM, 1993 05 ICMO/1993
• Boffa. Lisa Saunders, Novak, Bruce M. , Transition metal catalysis in macromolecular design , ACS, 2000 45 SAU
• De Graef, Marc & McHenry, Michael E, , Structure of materials : and introduction to crystallography,, Diffraction, and symmetry. – 2nd 2012. CUP, 30 DEG/1
• Dudeck, Karleen J. , High resolution electron microscopy investigation of the , Strontium titanate 3 (112) [110] grain boundary, DPhil 2009. 03 DUD/1
• Fredriksson, Hasse, Solidification and crystallization processing in metals and alloys, 30 FRE
• Fundamenski, Wojciech , Power exhaust in fusion plasmas, CUP, 2010. 25 FUN
• Gabrys, Barbara J and Langdale, Jane A. , How to succeed as a scientist: from postdoc to professor , CUP, 2012. 04-3 GAB ( 5 copies 1 in Library office)
• Gault, Baptiste … et al , Atom probe microscopy, Springer, 2012 32 GAU
• Grosso, Giuseppe & Parravicini, Giuseppe Pastori , Solid state physics , Academic Press, 2000. 22 GRO
• Hosford, William F. , Iron and Steel, CUP, 2012 16 HOS
• Iron and Steel Institute, Vacuum degassing of steel, Papers and discussions from the technical sessions of the , Iron and Steel Institute AGM London 5/6 May 1965, 05 ISI 1965/3
• Kagami Memorial Research Institute for Materials Science and, Technology, Annual Report 2012 , 04-2 KML/2012
• Karney, Graeme B , Chemical and structural characterization of incrementally grown, biominerals, DPhil, 2009 03 KAR/2
• Kelly, Anthony and Knowles, Kevin, Crystallography and crystall defects – 2nd ed, Wiley, 2012 30 KEL/1
• , McCracken, Gary , Fusion : the energy of the Universe – 2nd 2012, Elsevier/Academic Press, 2012, 25 McC/1 – 2 copies one in Library office
• , Newcomb, S.B. & Little, J.A. (eds) , Microscopy of oxidation 3 Proceedings of the Third International , Conference on the Microscopy of Oxidation , IOM, 1993 05 ICMO/1996
• Royal Society , Year book of the Royal Society 2012, 08 ROY
• Sau, Tapan and Andrey L. Rogach Gault, Baptiste … et al, Complex-shaped metal nanoparticles, Wiley, 2012 58 SAU
• Tomalia, Donald A., Christensen, Jorn B. and Boas, Ulrik, Dendrimers, dendrons and dendritic polymers , CUP, 2012 45 TOM
• , VANITEC, Vanadium in rail steels, Proceedings of Seminar in Chicago November 1979 , 05 VITC 1979
• West, D.R.F. & Saunders, N. , Ternary phase diagrams in materials science - 3rd ed., Maney 2002

Books added to the Library January - July 2012

• Allwood, Julian M. … et al ‘Sustainable materials with both eyes open’ UIT.2012 57 ALL
• American Society of Metals Fatigue and microstructure : Papers presented at the 1978 ASM Materials Science Seminar ASM 1978. 05 ASM/1978
• Ashby, Michael F. ‘Materials and the environment :eco-informed material choice.’ Elsevier, 2013. 57 ASH/1
• Bailey, R.T., North, Alastair M., Pethrick, R.A. ‘Molecular motion in high polymers’ Clarendon Press, 1981. 45 BAI
• Behan, Gavin l ‘Optical sectioning in the aberration-corrected scanning transmission and scanning confocal electron microscope.’ DPhil 2009 03 BEH
• Bershtein, Vladimir A. & Egorov, Victor M. ‘Differential scanning calorimetry of polymers’ Ellis Horwood, 1994. 45 BER
• Bowcock, Simon ‘Aluminium nanoparticles for use in new fuel technologies’ Part II Thesis, 2010 03 BOW/7 + cd-rom
• Bridge, Nicola ‘Surface sculptures for novel coating/substrate combinations’ Part II thesis 2010. 03 BRI/7 + cd-rom
• Butler, J.A.V. ‘Chemical thermodynamics’ Macmillan and Co., 1946. 4th ed. 40 BUT/1
• Camley, Robert E. & Stamps, Robert L. (eds) Solid state physics volume 62 Elsevier/Academic Press, 2011 02 SSP/62
• Cheng, Shaolong ‘Processing and characterisation of transition metal chalcogenide nanowires’ Part II Thesis, 2010 03 CHE/5 + cd rom
• Choi, Wonbong & Lee, Jo-won (eds) ‘Graphene : synthesis and applications’ CRC Press, 2012 59 CHO
• Curtis, Helena ‘Ceramic armour’ Part II Thesis 2009, 03 CUR/2 + cd rom
• Dušek, Karel (ed) ‘Polymers in medicine’ Springer-Verlag, 1984 45 DUS
• Faraday Society ‘Polymer solutions’ Faraday Society, 1970.45 FAR
• Fraser, Keith J. ‘A cathodoluminescence study of gettering in silicon.’ DPhil 2009 03 FRA/6
• Freiman, Stephen, John J Mecholsky ‘The Fracture of brttle materials’ John Wiley/American Ceramic Society, 2012 54 FRE
• Gilbert, Mark R. ‘BCC metals in extreme environments : modelingthe structure and evolution of defects.’ DPhil 2009 03 GIL/5
• Gilchrist, J.D. ‘Extraction metallurgy’ Pergamon Press, 1989. 3rd ed. 41 GIL/B
• Ginley, David & Cahen, David (eds) ‘Fundamentals of materials for energy and environmental sustainability.’ CUP, 2012. 60 GIN
• Hanson Pettengell, Luke ‘Environmental sensing using semiconductor quantum dots’ Part II Thesis 2009, 03 HAN/4 + cd-rom
• Houldcroft, P.T. ‘Welding process technology’ CUP, 1977. 56 HOU
• Hull, D. & Bacon, D.J. ‘Introduction to dislocations’ Elsevier, 2011. 5th ed. 54 HUl/1 Overnight Library office
• Hutchings, I.M. ‘Tribology : friction and wear of engineering materials’ Edward Arnold, 1992. 54 HUT/A (replacement)
• Ibrahim, Tamara I ‘High temperature toughness of t’ Zirconia’ Part II 2009. 03 IBR + cd-rom
• Lee, David ‘Building high-efficiency plastic solar cells’ Part IIThesis, 2008. 03 LEE/4 + cd-rom.
• McGhee, Robert ‘Fundamentals of cyclic deformation and fatigue initiation’ Part II Thesis, 2010. 03 McG/4 + cd-rom
• Mistry, Rajesh ‘Spin active carbon nano-peapod : transparent polymer matrices’.Part II 2009. 03 MIS + cd rom.
• Molyneux, Philip ‘Water-soluble synthetic polymers : properties and behavior. 2 vols’ CRX Press, 1982. 45 MOL
• Morgan, S.W.K. ‘Zinc and its alloys and compounds’ Ellis Horwood Limited, 1985. 52 MOR
• Ng, Tsz Cheong (Tony) ‘Synthesis, isolation and characterization of endohedral metallofullerenes’ Part II 2008, 03 NG + cd rom
• Noon, Katherine ‘Carbon Fibre : Alternative precursors’ Part II Thesis, 2008. 03 NOO + cd rom
• Pizzini, Sergio (editor) ‘Advanced silicon materials for photovoltaic applications’ Wiley, 2012. 21 PIZ
• Roots, Sam I ‘Novel thin-film growth techniques for iron pnictide superconductors’ Part II Thesis, 2009. 03 ROO + cd rom
• Rowles, Elizabeth ‘Anisotropic hydrogel tissue expanders in plastic surgery.’ Part II Thesis, 2008. 03 ROW/1 + cd rom
• Royal Society Year Book of the Royal Society 2010 RSA. 2010. 08 ROY/2010
• Sopicka-Lizer, Malgorzata (ed) ‘High-energy ball milling :mechanochemical processing of nanopowders’ CRC/Woodhead Publishing, 201058 SOP
• Tagmatarchis, Nikos (ed) ‘Advances in carbon nanomaterials : science and applications’ Pan Stanford Publishing, 2012-07-16 58 TAG
• Tanishima, Satoshi ‘Electrical conduction in cerate ceramics’ DPhil Thesis 1995. 03 TAN/3
• Tarleton, Edmund ‘Dislocation-dynamics modelling of crack-tip plastic zones and brittle-ductile transitions in BCC metals’ DPhil Thesis 2009. 03 TAR
• Terehhov, Semjon ‘Control of structure coarsening’ Part II Thesis, 2008. 03 TER + cd-rom
• Tipping, Philip (ed) ‘Understanding and mitigating ageing in nuclear power plants.’ Woodhead Publishing, 2010. 25 TIP
• Tundo, Pietro ‘Continuous flow methods in organic synthesis’ Eliis Horwood, 1991. 40 TUN
• Vu, Thien Binh, Garcia, N. & Dransfeld, K (eds) ‘Nanosources and manipulation of atoms under high fields and temperatures : applications.’ Kluwer Academic Publishing, 1993. 05 NATO/1992
• Wang, Huiliang (Evan) ‘Fabrication and characterization of carbon nanotube and peapod device’ Part II Thesis, 03 WAN/3 + cd-rom
• Williams, David, C. Barry Carter ‘Transmission electron microscopy : a textbook for materials science’ Springer. 2nd edition. 32 WIL/4
• Winborn, William ‘Charaterizing the effect of defects in mulit-crystalline silicon.’ Part II Thesis 2008 03 WIN/1 + cd-rom
• Wong, H-S Philip & Akinwande, Deji ‘Carbon nanotube and grapheme device physics’ CUP, 2011 58 WON
• Wu, Jia ‘Polymer thin film morphology.’ Part II Thesis 03 WU/1 + cd-rom
• Xu, Yan ‘Electrochemica behaviour of galvanic corrosion cells beneath organic coatings’ DPhil 2011 03 XU/1
• Yeoh, Pei Lou ‘Biomimetic melanin nanocomposites’ Part II Thesis, 2010 03 YEO + cd-rom
• Zaiken – ‘Annual report of Kagami Memorial Research Institute for Materials Science and Technology, Waseda University’ 2011 no 19 04-2 KML 2011

Books added to the Library August - December 2011

• Annual Review of Materials Research, volume 41 – 2011
• ASM Handbook, Volume 6A – Welding fundamentals and processes ASM International, 2011 04-1 ASM/6A
• Atlas, Sheldon, Pearc, Eli M, Eirich, F.R. (eds) Polymers to the year 2000 and beyond : A memorial symposium for Herman F. MarkInterscience Publication, 1993 05 PS/1993
• Aveson, John, Studying dendrite fragmentation using transparent organic analogue alloys. Part II Thesis 2009. 03 AVE + cd-rom
• Barford, William, Electronic and optical properties of conjugated polymers. OUP, 2009. 45 BAR/1
• Brown, Jennifer, Glazing in transparent water soluble films used to encapsulate consumer products, Part II Thesis 2009. 03 BRO/14 + cd-rom
• Cameron, Graeme, Shear alignment in block copolymer thin films, Part II Thesis 2008 03 CAM/2 + cd-rom
• Clegg, William (ed), Crystal structure analysis:principles and practice, OUP. 2nd ed. 200931 CLE
• Dewsbury, Simon, Gum –metal plasticity without dislocations? Part II Thesis, 2008. 03 DEW + cd-rom
• Downes, Sarah I, Filling CNTs with metals, Part II Thesis 2010. 03 DOW/3 + cd-rom
• Dowling, Michael, Identification of structural trends in nitrogen doped carbon nanotube. Part II 2008 03 DOW/3 + cd-rom
• Dunham, April, Micromechanical testing of grain boundary sliding, Part II 2009. 03 DUN/3 + cd-rom
• Gao, Wei, Li, Zhengwei and Sammers, Nigel. An introduction to electronic materials for engineers , 2nd ed. 2011. Springer, 2009 21 GAO Library office
• Ghali, Edward, Corrosion resistance of aluminium and magnesium alloys. Wiley, 2010 43 GHA
• Jackson, Kenneth A. Kinetic processes : crystal growth, diffusion, and phase transitions in materials. Wiley-VCH, 2010. 53 JAC/1
• Kumar, Challa (ed), Metallic Nanomaterials, Wiley-VCH, 2009 58 HUM/a
• Kumar, Challa (ed), Nanostructured thin films and surfaces. Wiley-VCH, 2010. 58 Hum/e
• Kumar, Challa (ed), Biomimetic and bioinspired Nanomaterials. Wiley-VCH, 2010. 58 HUM/g
• Kumar, Challa (ed), Mixed metal Nanomaterials. Wiley-VCH, 2009 58 HUM/c
• Langa, Fernando and Nierengarten, Jean-Francois. Fullerenes : principles and applications RSC. 2012/ 40 LAN
• Ozin, Geoffrey A. Nanochemistry – a chemical approach to Nanomaterials. 2nd ed. 2009 40 OZI/1 Library Office overnight loan
• RAO, C N R & Govindaraj, A Nanotubes and nanowires. 2nd ed. RSC Publishing, 2011 58 RAO/1
• Shangguan, Dongkai (ed) . Lead-free solder interconnect reliability. ASM International, 2005 56 SHA
• Sutton, Michael A., Orteu, Jean-José, Schreier, Hubert W. Image correlation for shape, motion and deformation measurements. Springer, 2009. 33 SUT Library office
• Tanaka, Fumihiko. Polymer physics: applications to molecular association and thermoreversible gelation. CUP, 2011. 45 TAN
• Tsurumi, Takaaki … et al . Nanoscale physics for materials science. CRC Press, 2010 58 TSU Library Office Overnight loan
• Tsymbal, Evgeny Y. & Žutić, Igor (eds). Handbook of spin transport and magnetism CRC Press, 2012. 04-1 TSY
• Vogl, Otto, Immergut, Edmund H. (eds). Polymer science in the next decade trends, opportunities, promises. John Wiley & Sons, 1987 05 PS/1987
• Watts, B.E. Uses of segregation in bridgman growth. DPhil Thesis 1980. 03 WAT/9
• Yen, The Fu. Environmental chemistry : chemical principles for environmental processes. Prentice hall PTR, 1999, 40 YEN
• Yost, F.G., Hosking, F.M, Frear, D.R. (eds). The mechanics of solder alloy wetting and spreading . Van Nostrand Reinhold, 1993. 56 YOS
• Young, Robert J. & Lovell, Peter A. Introduction to polymers - 3rd ed. CRC Press, 2011 2 copies 45 YOU/1 – 1 kept in Library office

Books added to the Library February- July 2011

• Anderson, T.W. An introduction to multivariate statistical analysis 3rd ed, CRC Press, 2003 10 AND Library office
• Balmer, Claire. Optical spectroscopy of endohedral fullerenes and functionalized endohedral fullerenes. Part II thesis. 03 BAL/3 (Also available on CD)
• Barashkov, N.N. and Gunder, O.A. Fluorescent polymers. Ellis Horwood, 1994. 45 BAR
• Blundell, Stephen J. & Blundell, Katherine M. Concepts in thermal physics- 2nd ed. OUP, 2010. 22BLU/1
• Broughton, J., Bristow, P. Newsam, J. (eds). Materials theory and modelling. MRS Symposium proc v. 291 1992 05 MRS 1992/291
• Comyn, J. (ed). Polymer permeability. Elsevier Applied Science Publishers, 1985 45 COM
• Crabtree, Robert H. Energy production and storage : inorganic chemical strategies for a warming world Wiley-Blackwell, 2010. 60 CRA Library Office
• Ghosh, Tushar K. & Prelas, Mark A. Energy resources and systems : vol 1 Fundamentals and non-renewable resources. Springer, 2009. 60 GHO Library office
• Gregori, Nicholas. Directional freeze-casting of alumina. Part II Thesis, 2007 03 GRE/5
• Harris, Peter J F. Carbon nanotube science. CUP, 2009 40 HAR/1
• Hermann, Klaus. Crystallography and surface structure. Wiley-VCH, 2011. 30 HER Library office
• Hosford, William F. & Caddell, Robert M. Metal forming : mechanics and metallurgy 4th ed CUP, 2011 52 HOS/2 Library office
• Lukehart, Charles M, Scott, Robert A. (eds). Nanomaterials : inorganic and bioinorganic perspectives. Wiley, 2008 DOM Office 58 LUK
• Klauk, Hagen (ed). Organic electronics : materials, manufacturing and applicatons. Wiley-VCH, 2006. 21KLA
• Klimov, Victor I (ed). Nanocrystal quantum dots CRC ; Taylor & Francis [distributor], 2010 21 KLI/1
• Mahapatro, anil & Kulshrestha, Ankur S. (ed). Polymers for biomedical applications ACS, 2008 45 MAH
• McDowell, R.H. Properties of alginates. – 2nd ed. Alginate Industries Limited, 1963 45 MCD
• Mobey, David P. (ed). Plastics from microbes. Hanser, 1994 45 MOB
• Moss. Steven C. … et al. Growth, evolution and properties of surfaces, thin films and self-organized structures. MRS, 2001 05 MRS 2000-648
• Mulaik, Stanley A. Foundations of factor analysis. – 2nd ed. CRC Press, 2010. 10 MUL
• Parkin, Stuart S.P. … et al (eds). Magnetic surfaces thin films and multilayers MRS Symposium Proc v. 231 1992 05 MRS 1991/1
• Pritchard, Geoffrey. Plastics additives : an A-Z reference. Chapman & Hall, 1998 01 Prit Reference
• Rounthwaite, Nicholas J. Anisotropic hydrogel tissue expanders. Part II Thesis, 2007. 03 ROU
• Sakurada, Ichiro. Polyvinyl alcohol fibers. Marcel Dekker, 1985 45 SAK
• Shorter Oxford English dictionary on historical principles. – 6th ed. OUP, 2007 2 vols 06 SHO Reference
• Streat, M. & Naden, D. (eds). Ion exchange and sorption processes in hydrometallurgy Society of Chemical Industry/John Wiley 1987 41 STR
• Wilkes, James O. Fluid mechanics for chemical engineers. Prentice Hall, 1999. 45 WIL/2
• Wirpsza, Zygmunt. Polyurethanes : chemistry, technology and applications Ellis Horwood, 1993 45 WIR
• Yu, Peter Y. Fundamentals of semiconductors – 4th ed. 2010 Springer 21 YU

Books added to the Library August - January 2011

• Aaronson, Hubert I., Enomoto, Masato & Lee, Jong.K Mechanisms of diffusional phase transformations in metals and alloys. CRC Press, 2010 53 AAR/1 2 copies 1 Library Office.
• Abe, Fujio. Kern, Torsten-Ulf, Viswanathan, R. (eds) Creep-resistant steels. Woodhead Publishing, 2008. 54 ABE Library Office.
• Akasaka, T., Wudl, F. & Nagase, S. (eds), Chemistry of nanocarbons Wiley, 2010. 40 AKA Library Office
• Ashby, M.Materials selection in mechanical design Elsevier Butterworth-Heinemann, 2011, 4th ed. 2 copies 56 ASH/4 ( 1 in library office).
• Bramfitt, Bruce L., Benscoter, Arian O. Metallographer’s guide ASM, 2002 04-1 BRA/3.
• Briscoe, Noel A. Ultrastructure and catalytic activity of some complex oxides DPhil 1985, 03 BRI/5.
• Britton, T. Ben A nanoindentation study of slip transfer at grain boundaries Part II Thesis 2007 03 BRI/4
• Brown, Gareth Structural studies of filled single walled carbon nanotubes and inorganic fullerenes DPhil 2002. 03 BRO/13
• Budinski, Kenneth, Budinski, Michael K. Engineering materials : properties and selection. 9th ed. Pearson, 2010. 50 BUD/1 Library Office.
• Coley, David, Energy and climate change : creating a sustainable future. Wiley, 2008. Library Office 60 COL.
• Cowie, J.M.G., Arrighi, Valeria Polymers : chemistry and physics of modern materials. 3rd ed. CRC Press, 2008. 45 COW/1 (2nd copy).
• Davis, J.R. (ed) Corrosion : understanding the basics. ASM, 2000. 43 DAV/1.
• Duffus, Philippa. Mechanics of buckling of stones that expand on exposure to moisture. Part II thesis 2007. 03 DUF/1. (also available on CD)
• Dusastre, Vincent (ed) Materials for sustainable energy World Scientific/Nature Publishing Group, 2011 60 DUS
• Erni, Rolf. Aberration-corrected imaging in transmission electron microscopy. Imperial College Press, 2010 32 ERN Library Office.
• Ertl, Gerhard Reactions at solid surfaces. Wiley, 2009. 40 ERT PL- APRG.
• Harris. Gari Stuarat Surface profile imaging of spinal catalysts. DPhil 1990. 03 HAR/10.
• Heeger, A.J., Sariciftci, N.S. & Namdas, E.B. Semiconducting and metallic polymers OUP, 2010. 45 HEE.
• Hirscher, Michael (ed) Handbook of hydrogen storage Wiley-VCHm 2010 60 HIR Library Office.
• Hosford, William F. Physical metallurgy 2nd ed. :CRC ; Taylor & Francis, 2010. 50 HOS/3.
• James, Frank A J L (ed) Christmas at the Royal Institution : an anthology of lectures. World Scientific, 2007. 04-4 JAM.
• Lamb, Bernard C. The Queen’s English and how to use it Michael O’Mara Books Limited, 2010. 04-3 LAM.
• Lorenzini, G. Biserni, C. & Flacco, G Solar thermal and biomass energy. WITPress, 2010. 60 LOR.
• Mallick, P.K. (ed Materials, design and manufacturing for lightweight vehicles. Woodhead Publishing, 2010 56 MAL Library Office.
• Martin-Palma, Raúl. Lakhtakia, Akhlesh. Nanotechnology : a crash course SPIE Press, 2010. 21 MAR/2 Library Office 1 copy main library.
• Messler, Robert W. Joining of materials and structures : from pragmatic process to enabling technology. Elsevier Butterworth-Heinemann, 2004 Library Office 54 MES.
• Oganov, Artem R. (ed) Modern methods of crystal structure prediction Wiley-VCH, 2011. 30 OGA Library office.
• Ramsden, Paul. Learning to teach in Higher Education – 2nd ed. RoutlegeFalmer, 2003.
• Ruhle, Clarke (ed). Annual Review of Materials Research volume 40 2010 02 ARMR/40.
• Schnabel, Manuel Processing and characterization of Mo6S2I8nanowires. Part II 2009. 03 SCH/7.
• Seely, John Oxford A-Z of Grammar and punctuation OUP, 2nd ed. 2009 04-3 SEE (3 copies -1 lIbrary office).
• Sha, Wei. & Guo, Zhanli. Maraging steels : modelling of microstructure,properties and applications. CRC ; Woodhead, 2009. 50 SHA.
• Smirnov, Boris M. Cluster processes in gases and plasma. Wiley-VCH, 2010 40 SMI/1 PL- APRG.
• Smirnov, Boris M. Principles of statistical physics: distributions, Atom structures, phenomena, kinetics of atomic systems Probe Wiley-VCH, 2006 20 SMI/1 PL APRG
• Somorjai, Gabor A. & Yimin Li Introduction to surface chemistry and catalysis John Wiley & Sons, 2010. 40 SOM.
• Spaldin, Nocola A. Magnetic materials:fundamentals and applications CUP, 2011. 21 SPA.
• Suryanarayana, C., Inoue, ABulk metallic glass CRC Press, 2011. 44 SUR.

Books added to the Library January - July 2010

• Abbaschian, Reza, Abbaschian, Lara & Reed-Hill, Robert E. "Physical metallurgy principles – 4th ed. SI" CENGAGE. Learning. 2010. 50 REE/H2 copies - 1 in Library office
• Ashby, Michael F. "Materials and the environment" Butterworth-Heineman, 2009. 57 ASH
• "ASM Handbook volume 8 (Revised edition 2000) Mechanical testing and evaluation." 04-1 ASM/8 REFERENCE
• Barkhouse, Aaron "Enhancing charge separation and transport in polymer solar cells." DPhil 2007. 03 BAR/8
• Basu, B, Katti, D & Kumar, A.(eds) "Intermational Conference on Design of Biomaterials Advanced biomaterials" Wiley ; The American Ceramic Society, 009. 05 ICDB
• Brooke-Hitching, Matthew "Colloidal processing and sintering of nano-sized alpha-alumina." Part II 2007 . 03 BRO/12
• Burlakov, Stanislav "Modelling quantum dynamics of interacting spin systems under microwave excitations." Part II, 2006. 03 BUR/6
• Chiang, Yet-Ming, Birnie, Dunbar III Kingery, W. David "Physical ceramics : principles for ceramic science and engineering." Wiley/MIT 1997 (2nd copy). 44 CHI
• Copplestone, Chris "Block copolymer thin films" Part II, 2007. 03 COP/1
• "CRC Handbook of Chemistry and Physics 90th ed." 2009-2010. 04-1 CRC REFERENCE
• Darvell, B.W. "Materials Science for dentistry – 9th ed." CRC Press, 2009. 57 DAR
• Dewar, M.J.S "The electronic theory of organic chemistry" Clarendon Press, 1948. 40 DEW F11
• Evans, John W "A guide to lead-free solders" Springer, 2007. 56 EVA Library Office
• Fox, Mark "Optical properties of solids" 2nd 2010. OUP. 22 FOX/1 Library Office
• Garcia-Martinez, Javier "Nanotechnology for the energy challenge" Wiley-VCH, 2010. 58 GAR
• Ge, Ling "Theory and modelling of spin-qubit interactions in nanotubes and fullerences" DPhil 2008. 03 GE
• Glasman-Deal, Hilary "Science research writing : for non-native speakers of English" Imperial College Press, 2010. 04-1 GLA Overnight loan
• Groysman, Alec "Corrosion for everybody." Springer, 2010. 43 GRO Library Office
• Holtom. Daniel & Fisher, Elizabeth "Enjoy writing your science thesis or dissertation!" Imperial College Press, 1999. 04-1 HOL Overnight Loan
• Hosford, William F. "Mechanical behaviour of materials – 2nd ed." CUP, 2010. 50 HOS/3
• Intermational Conference on Design of Biomaterials : Advanced biomaterials / edited by B. Basu, D. Katti, A. Kumar. Wiley ; The American Ceramic Society,2009. 05 ICDB
• Kang, Suk-Joong L "Sintering : densification, grain growth, and microstructure." Elsevier, 2005. 44 KAN Library office (2nd copy)
• Kelton, K.F. & Greer, A.L. "Nucleation in condensed matter" Elsevier, 2010. 58 KEL
• Keyse, R.J. et al. "Introduction to scanning transmission electron microscopy." Taylor & Francis, 1998. 32 KEY Library Office (replacement copy)
• Kirkham, Harold and Dumas, Robin C. "The right graph : a manual for technical and scientific authors" Wiley, 2009. 16 KIR Library office
• Kochergin, Vladimir & Föll, Helmut "Porous semiconductors : optical properties and applications." Springer, 2009. 21 KOC
• Kok, Pieter & Lovett, Brendon W. "Introduction to optical quantum information processing." CUP, 2010. 20 KOK Library Office
• Krauss, George "Steels : processing, structure, and performance" ASM, 2005. 51 KRA/D Library office
• Kumar, C.S.S.R. "Semiconductor nanomaterials." Wiley-VCH,2010. 58 KUM
• Lebrun, Jean-Luc "Scientific writing : a reader and writer’s guide." - expanded ed. 2010. 04-1 LEB
• Marinescu, Ioan D. (ed) "Handbook of advanced ceramics machining." Boca Raton :CRC Press,c2007. 04-1 MAR/1 Reference
• Marinescu, Ioan D.Uhlmann, Eckart. Doi, Toshiro K (eds) "Handbook of lapping and polishing" Boca Raton, Fla : London :CRC ; Taylor & Francis 2007. 04-1 MAR Reference
• Martin, John W. (editior) "Concise encyclopaedia of materials processing." Elsevier, 2009. 01 MAR/6 Reference
• Mossman, S.T.I. & Morris, Peter John Turnbull "The development of plastics" Royal Society of Chemistry, 1994. 45 MOS
• Nelson, Jenny "The physics of solar cells." Imperial College Press, 2003. 21 NEL (1 Library office)
• Rackley, Stephen A. "Carbon capture and storage" Butterworth-Heinemann/Elsevier, 2010. 60 RAC Library office
• Rahaman, M.N. "Ceramic processing and sintering." – 2nd ed. Taylor & Francis, 2003. 44 RAH Library office (2nd copy)
• Reed, James S. "Principles of ceramics processing." – 2nd ed. John Wiley & Sons, 1995. 44 REE Library Office
• Reed, Roger C. "The superalloys : fundamentals and applications" CUP, 2006. 52 REE (3rd copy)
• Scholz, Carmen, "Polymers from renewable resources : biopolyesters and biocata" American Chemical Society, 2000. 05 ACS 1998
• Solymar, L. & Walsh, D. "Electrical properties of materials." 8th ed. 2010 OUP, 2010. 21 SOL/3 Library Office
• Toy, Arthur D. F. "Phosphorus chemistry in everyday living" American Chemical Society, 1987. 40 TOY Room F11
• Vayssieres, Lionel "On solar hydrogen & nanotechnology" John Wiley & Sons (Asia) Pte Ltd, 2009. 60 VAY
• Veal, T.D. , McConville, C.F., Schaff, W.J. (eds) "Indium nitride and related alloys" CRC Pres, 2010. 21 VEA Library Office
• Villars, P. "Pearson’s Handbook : Crystallographic data for intermetallic Phases." – Desk ed. 1997. 2 vols. 04-1 PEA/2 REFERENCE
• Zewail, Ahmed H. & Thomas, John M. "4D electron microscopy : image in space and time" Imperial College Press, 2010. 32 ZEW

Books added to the Library August- December 2009

• Ahmed, H. & Spreadbury, P.J. Analogue and digital electronics for engineers : an introduction. 2nd ed. CUP, 1984, 21 AHM
• Andrews, John & Jelley, Nick Energy science : principles, technologies, and impacts. OUP, 2007. 57 AND ( 2copies ; 1 in Library office)
• Annual review of materials research, volume 39 , 2009 , 02 ARMR
• Arsenault, R.J. , Beeler, J.R., Jr., Esterling, D.M. Computer simulation in materials science. ASM International, 1988. 05 ASM/1986/1
• Bianco, Silvan J. Computer physics research trends, Nova Science Publishers, Inc., 2007 12 BIA
• Breuer, H-P and Petruccione, F. The theory of open quantum systems, OUP, 2007 20 BRE Library Office
• Briggs, Andrew & Kolosov, Oleg, Acoustic microscopy – 2nd ed. OUP, 2010, 32 BRI/3
• Campbell, John, Castings – 2nd. ed. Butterworth-Heineman, 2003, 56 CAM/1 – 2 copies 1 library office
• Campbell, John, Castings practice : the 10 rules of castings, Butterworth-Heineman, 2004, 56 CAM/2 Library Office
• Cosgriff, E.C. Image formation mechanisms in three-dimensional aberration-corrected scanning transmission electron microscopy. DPhil thesis, 2008. 03 COS
• Dancer, Claire, Ceramic processing of magnesium diboride, DPhil thesis, 2008. 03 DAN/1
• Efros, A., Lockwood, D.J., Tsybeskov, L. (eds), Semiconductor nanocrystals : from basic principles to applications. Kluwer Academic/Plenum Publishers, 2003, 21 EFR
• Fletcher, J Electron microscope studies of ion implantedsilicon. DPhil, 1979 , 03 FLE/2
• Gibala, R & Hehemann, R.F. (eds), Hydrogen embrittlement and stress corrosion cracking American Society of Metals, 1984, 05 ASM/1980
• Goodship, Vannessa, Introduction to plastics recycling – 2nd ed. Smithers Rapra Technology Limited, 2007, 57 GOO(Library Office)
• GB Royal Commision on Environmental Pollution, Novel materials in the environment : The case of nanotechnology. TSO (Stationery Office), 2008, 04-2 ROY
• Guo, Sheng, Fluorescence microscopy investigation on residual stresses in alumina-based ceramics, DPhil thesis, 2008. GUO
• Haasen, Peter, Physical metallurgy. 2nd ed. CUP. 1986, 50 HAA/2
• Hardy, Graham, A study of the interaction of point defects withdislocations, DPhil, 1985, 03HAR/9
• Heading, J. Mathematical methods in science and engineering 2nd ed. 1970. Edward Arnold. 10 HEA/B
• Hermes, Matthew E. Enough for one lifetime : Wallace Carothers, Inventor of nylon. American Chemical Society with the Chemical Heritage Foundation1996. 16 HER
• Hornyak, Gabor L. … et al, Fundatmentals of nantechnology. CRC Press, 2009 58 HOR/1
• Hornyak, Gabor L. … et al, Introduction to nanoscience & nanotechnology CRC Press, 2009. 58 HOR Reference
• Hornyak, Gabor L. … et al, Introduction to nanoscience, CRC Press, 2009. 58 HOR/2
• Kyle, B.G. Chemical and process thermodynamics. 3rd ed. Prentice Hall, 1999, 40 KYL
• Limpichaipanit, Apichart, Wear and indentation of AI2O3/SiC nanocomposites DPhil thesis, 2008, 03 LIM
• Martin, John W. (ed), Concise encyclopaedia of materials for energy systems. Elsevier, 2009, 01 MAR/5 Reference
• Morley, Andrews, Thermal ageing of low alloy steels. DPhil thesis, 2008 , 03 MOR/11
• Pieñkowski, Marian Czeslaw, Electron microscopy of mixed uranium oxides, DPhil, 1989 03 PIE
• Pettifor, D.G. & Cottrell, A.H. (eds), Electron theory in alloy design. Institute of Materials, 1992, 23 PET
• Qin, Ting, Binding-energy relations and equations ofstate for non-magnetic transition metals, DPhil 2008 03 QIN/1
• Ritzhaupt-Kleissl, H-J & Johander, Per (eds), Ceramics processing in microtechnology Whittles Publishing, 2009, 44 RIT/1 Library office
• Rogach, Andrey L. (ed), Semiconductor nanocrystal quantum dots :synthesis assembly, spectroscopy and applications, SpringerWienNewYork, 2008. 21 ROG
• Russell, Bruce C., The polar surfaces of strontium titanate, DPhil, 2008 03 RUS/1
• Saran, Mohinder, High temperature strengthening zirconia, DPhil, 2009 03 SAR
• Schwartz, Adam J. … et al , Editors, Electron backscatter diffraction in materials science – 2nd . Springer, 2009, 30 SCH/2
• Schweitzer, Philip A. Fundamentals of corrosion : mechanisms, causes, and preventive methods. CRC Press, 2010, 43 SCH Library Office
• Shih, Shao-Ju, Nanometre-scaled structural studies of strontium titanate by electron microscopy andmicroanalysis.DPhil, 2009, 03 SHI/6
• Van Aken, David C. & Hosford, William F. Reporting results : a practical guide for engineers and scientists. CUP, 2008. 04-1 VAN/3 Reference
• Wellington, Pat & Foster, Niall, Effective team leadership for engineers IET, 2009 04-1 WEL
• Wessels, B.W. & Chin, G.Y. (eds), Advances in electronic materials, American Society for Metals, 1986. 05 ASM/1984
• Young, David, High temperature oxidation and corrosion of metals. Elsevier 2008. 43 YOU Library office
• Zandbergen, Mathijs, Study of early-stage precipitation in A1-Mg-Si(-Cu) alloys by 3D atom probe. DPhil 2008, 03 ZAN

Books added to the Library May - August 2009

• Altan, Taylan.Oh, Soo-Ik. Gegel, H. L. Metal forming : fundamentals and applications, American Society for Metals,1983. 50 ALT
• Arsenault, R.J. , Beeler, J.R., Jr., Esterling, D.M. Computer simulation in materials science. ASM International, 1988. 05 ASM/1986/1
• Baumann, Gerd. Mathematica® for theoretical physics : electrodynamics, quantum mechanics, general relativity and fractals – 2nd ed. Springer, 2005. 10 BAU
• Bianco, Silvan J. Computer physics research trends. Nova Science Publishers, Inc., 2007 12 BIA
• Catlow, C.R.A., Stoneham, A.M and Sir John Meurig Thomas (eds). New methods for modelling processes within solids and at their surfaces .Royal Society ; Oxford University Press, 1993 10 CAT
• Copper Development Association. The brasses properties & applications 2nd. ed. 2005. 52 CDA/2
• Cosgriff, E.C. Image formation mechanisms in three-dimensional aberration-corrected scanning transmission electron microscopy. DPhil thesis, 2008. 03 COS
• Dancer, Claire. Ceramic processing of magnesium diboride. DPhil thesis, 2008. 03 DAN/1
• Earis, Philip (ed). Electrocatalysis : theory and experiment at the interface : Royal Society of Chemistry, 2008 43 EAR
• Fratzl, Peter (editor). Collagen : structure and mechanics. Springer, 2008. 45 FRA Library Office.
• GB Royal Commision on Environmental Pollution. Novel materials in the environment: The case of nanotechnology. TSO (Stationery Office), 2008 04-2 ROY
• Grovenor, C. Microelectronic materials. Adam Hilger, 1989 21 GRO/1B
• Guo, Sheng. Fluorescence microscopy investigation on residual stresses in alumina-based ceramics, DPhil thesis, 2008. 03 GUO
• Hart’s Rules New Hart’s Rules : The handbook of style for writers and editors / adapted from The Oxford Guide to style” R.M. Ritter OUP, 2005. 04-1 RIT Reference, Library office
• Hammond, Christopher. The basics of crystallography and diffraction. 3rd ed. 2009. International Union of Crystallography and OUP. 30 HAM/2 – Library Office 2 copies
• Hermes, Matthew E. Enough for one lifetime : Wallace Carothers, Inventor of nylon. American Chemical Society with the Chemical Heritage Foundation1996. 16 HER
• Hornyak, Gabor L. et al. Introduction to nanoscience & nanotechnology, CRC Press, 2009. 58 HOR Reference
• Humphreys, F. J. (ed). Electron Microscopy and Analysis 1991, Institute of Physics Conference, 1991, 05 /1991/ISP/119
• International Tin Research Institute. A guide to tin, ITRI, 52 ITRI
• Jakubovics, J. P. Magnetism and magnetic materials – 2nd ed. Institute of Metals, 1994 21 JAK/F
• Jones, I. P. Chemical microanalysis using electron beams. Institute of Materials, 1992 42 JON
• Joseph, Günter. Copper : its trade, manufacture, use, and environmental status, ASM International, 1999 52 JOS
• Kyle, B.G. Chemical and process thermodynamics. 3rd ed. Prentice Hall, 1999 40 KYL
• Lerner, Rita G. & Trigg, George L. (eds). Encyclopedia of Physics – 2nd ed. VCH Publishers, 1991. 01 LER REFERENCE
• Limpichaipanit, Apichart. Wear and indentation of AI2O3/SiC nanocomposites, DPhil thesis, 2008, 03 LIM
• Lorrain, Paul. Electromagnetic fields and waves – 2nd ed. W.H. Freeman, 1970 21 LORM
• Manchester, F. D. Phase diagrams of binary hydrogen alloys. ASM International, 2000 04-1 MAN/1
• Moody, G.J., Thomas, J.D.R. Noble gases and their compounds, Pergamon 1964, 40 MOO/1
• Morley, Andrews. Thermal ageing of low alloy steels. DPhil thesis, 2008 03 MOR/11
• Muccio, Edward A. Plastics processing technology, ASM International, 1994 45 MUC
• Phillips, A. C. Introduction to quantum mechanics, Chichester,Wiley,2003. 20 PHI
• Porter, David A.Easterling, K. E. Sherif, Mohamed. Phase transformations in metals and alloys. 3rd ed, CRC Press, 2009 54 POR/I, (3 copies 1 Office 2 Library)
• Randle, V., Microtexture determination and its applications, Institute of Materials, 1992 32 RAN
• Rhoderick, E. H, Metal-semiconductor contacts, Clarendon Press, 1988 21 RHO
• Schwartz, Adam J. … et al , Editors Electron backscatter diffraction in materials science – 2nd . Springer, 2009. 30 SCH/2
• Schwartz, Mel M, Joining of composite-matrix materials, ASM International, 1994 45 SCH/3
• Tiwari, Archana, Magnetic and optical properties of Er3+ - doped endohedral fullerenes. DPhil 2008 03 TIW
• Van Aken, David C. & Hosford, William F. Reporting results : a practical guide for engineers and scientists. CUP, 2008. 04-1 VAN/3 Reference
• Wellington, Pat & Foster, Niall, Effective team leadership for engineers, IET, 2009 04-1 WEL
• Wessels, B.W. & Chin, G.Y. (eds), Advances in electronic materials, American Society for Metals, 1986.05 ASM/1984

Books added to the Library January- April 2009

• Ashby, Michael F. Materials and the environment :eco-informed material choice. Elsevier Butterworth-Heineman,2009. 57 ASH
• ASM International. Practical guide to image analysis,ASM. 2000. 34 ASM.
• Astruc,Didier. Nanoparticles and catalysis. Wiley-VCH, 2008. 40 AST Library Office
• Belov, N.A., Aksenov, A.A. & Eskin, D.G. Iron in aluminium alloys. Taylor & Francis,2002. 52 BEL/1.
• Brodova, I.G., Popel, P.S. & Eskin, G.I. Liquid metal processing : applications to aluminium alloy production. Taylor & Francis,2002. 52 BRO.
• Chanda, Manas. Introduction to polymer science and chemistry :a problem solving approach. CRC Press, 2006. 45 CHA Library office.
• Chattopadhyay, R. Surface wear : analysis, treatment, and prevention. ASM, 2001. 54 ASM.
• Christie, R.M. Colour chemistry. RSC, 2001. 40 CHR.
• Chu, Bryan Tsu-Te. Carbon nanotube reinforced inorganic matrix DPhil, 2008. 03 CHU/1.
• Clarke, Eleanor E. Internal stresses and dislocation densities generated by phase transformations in steel. DPhil, 2008 03 CLA/5.
• Cullity, B.D., Graham, C.D. Introduction to magnetic materials – 2nd ed, IEEE Press, Wiley, 2009. 21 CUL.
• Fischer-Cripps, Anthony C. Nanoindentation. – 2nd ed. Springer, 2004. 58 FIS.
• Fitzsimons, Joseph F. Architectures for quantum computation under restricted control. DPhil, 2007. 03 FIT.
• Haigh, Sarah. Super resolution tilt series exit wave restoration from aberration corrected images DPhil, 2007. 03 HAI/1.
• Harris, Peter J.F. Carbon nanotube science : synthesis, properties and applications. CUP, 2009. 40 HAR/1.
• Harrison, Walter A. Elementary electronic structure. – Revised ed. World Scientific, 2004. 2 copies 1 office. 22 HAR/1.
• Hirsch, Jurgen, Skrotzki, B. & Gottstein, Gunter Aluminium alloys : their physical and mechanical properties.(11th International Conference on Aluminium Alloys) . Wiley-VCH, 2008. 05 ICAA/2008 ( 2 vols).
• Hodge, B.K. Alternative energy systems and applications. John Wiley & Sons, Inc. 2010. 57 HOD.
• Hosford, William F. Materials for engineers. CUP, 2008. 50 HOS/2.
• Hosford, William F. & Caddell, Robert M. Metal forming : mechanics and metallurgy CUP,3rd ed. 2007. 50 HOS/1.
• Jenkins, Mike (ed). Biomedical polymers. Woodhead Publishing Limited, 2007. 45 JEN.
• Karsa, D.R. & Stephenson, R.A. (eds). Chemical aspects of drug delivery systems. RSC, 1996. 40 KAR.
• Kelsall, Robert, Hamley, I., Geoghegan, Mark (eds). Nanoscale science and technology Wiley, 2005. 58 KEL.
• Kirk, Daniel J. A TEM study of magnetic tunnel junctions and magnetic materials. DPhil 2007. 03 KIR/2.
• Kumar, Akshay. Low temperature fracture mechanisms in spheroidised ferritic steels. DPhil 2007. 03 KUM.
• Laue, Kurt & Stenger, Helmut. Extrusion : processes, machinery, tooling. American Society for Metals, 1981. 56 LAU/1.
• Loudon, Rodney. The quantum theory of light - 3rd ed. Oxford University Press, 2000. 20 LOU/3.
• Marsh, Helen. Structural analysis of palladium nanocrystals and nanostructures on the strontium titanate (001). surface. DPhil 2008. 03 MAR/11.
• Masuda, Hiroaki, Higashitani, Ko, Yoshida, Hideto (eds). Powder technology handbook – 3rd ed. Taylor & Francis, 2006. 55 MAS.
• Meyers, Marc and Chawla, Krishan. Mechanical behavior of materials – 2nd ed. CUP, 2009 50 MEY.
• Newell, David T. The surface structure and reconstructions ofSrTiO3(001). DPhil 2007. 03 NEW/5.
• Owens, Frank J. & Poole, Charles P. The physics and chemistry of nanosolids. Wiley-Interscience, 2008. 58 OWE Library office.
• Pinitsoontorn, Supree. 3D atom probe studies of thin fillm magneticmaterials. DPhil, 2008 03 PIN.
• Schnabel, Wolfram. Polymers and light : fundamentals and technical applications. Wiley-VCH, 2007. 45 SCH/2 Library office.
• Steven Sikes, C. & Wheeler, A.P. Surface reactive peptides and polymers. ACS, 1991. 05 ACS/1989.
• Tadmor, Zehev, Gogos, Costas. Principles of polymer processing. 2nd edition, Wiley, 2006. 45 TAD/1.
• Totten, George E. & Scott MacKenzie, D. Handbook of aluminium v. 2. Alloy Production and materials manufacturing. CRC/Taylor Francis, 2003. 04-1 TOT.
• Vickerman, John C. & Gilmore, Ian S. (editors). Surface analysis – the principal techniques.- 2nd ed. Wiley, 2009. 32 VIC.
• Wahl, Denys A. Collagen-hydroxyapatite scaffolds for bone tissue engineering DPhil 2007. 03 WAH.
• Waring, Miles A T. The electrical and structural properties of lanthanum-doped lead zirconate titanate. DPhil, 2006. 03 WAR/9.
• Was, Gary S. Fundamentals of radiation materials science: metals and alloys. Springer, 2007 54 WAS/1.
• Wolf, Edward L. Nanophysics and nanotechnology : an introduction to modern concepts in nanoscience 2nd, updated and enlarged edition. 58 WOL/1 Library office.
• Zaiken – no 16 2008. Annual report of Kagami Memorial Research Institute for Materials Science and Technology, Waseda University. 2008 . 04-2-KML.

Books added to the Library August - December 2008

• Ahmed, Shafiq, Characterisation of grain boundaries and precipitation in ferritic steel rods. D Phil thesis, 03 AHM/1
• Annual Review of Materials Research V. 38 2008, 02 ARMR/38, Annual Reviews, 2008.
• Banerjee, S & Mukhopadhyay, P. Phase transformations : examples from titanium and zirconium alloys. Elsevier, 2007. 53 BAN
• Blondeau, Régis (editor) Metallurgy and mechanics of welding ISTE/ Wiley, 2008, 56 BLO
• Brandon, David & Kaplan, Wayne, 34 BRA/2, Microstructural characterization of materials John Wiley & Sons, 2008.
• Cotterill, Rodney, The Material world. CUP, 2008. New expanded edition. 01 COT/1
• Deak, David S. Molecular ordering on nanostructured strontium titanate surfaces. D.Phil 2007. 03 DEA/1
• Frost, H.J. & Ashby, M.F. Deformation-mechanism of maps the plasticity and creep of metals and ceramics. Pergamon Press, 1982. 54 /FRO/2A
• Ghetta, Veronique … et al (eds), Materials issues for generation IV systems :Status, open questions and challenges. Springer / NATO, 2008. 25 GHE (2 copies 1 on faculty loan)
• Hardyment, Archie. The superconducting properties of magnesium diboride in powder in tubes with iron and nickel sheaths. Part II, 2006. 03 HAR/8
• Heimann, Robert B. 56 HEI/1. Plasma spray coating. Wiley-VCH, 2008.
• Hitchman, Ralph. The effect of fabrication route on the microstructural characteristics and superconducting properties of magnesium diboride wires. Part II Thesis. 2006 03 HIT
• Klupp Taylor, Robin N. Self-assembled colloidal multifunctional nanostructures. DPhil 2007, 03 KLU
• Lambourne, Alexis, 03 LAM. Spray forming of Si-AI alloys for thermal management applications DPhil 2007
• Patterson, Gary. Physical chemistry of macromolecules. CRC Press, 2007. (Library Office) 45 PAT
• Philpot, Timothy A. Mechanics of materials : an integrated approach. John Wiley & Sons, 2008, 50 PHI (2 copies 1 in office).
• Plieth, W. Electrochemistry for materials science. Elsevier, 2008. 43 PLI.
• Rubahn, Horst-G?nter. Basics of nanotechnology. Wiley-VCH, 2008, 58 RUB
• Schwartz, Adam J. et al (eds). Electron backscatter diffraction in materials science. 30 SCH/1, Kluwer Academic/Plenum Publishers, 2000.
• Vollath, Dieter. Nanomaterials : an introduction to synthesis, properties and applications. – Wilet-VCH, 2008. 58 VOL

Books added to the Library April - July 2008

• Al Jassim, Mowafak M., Investigation of defects in InP, GaInAs GaInAsP structures D Phil Thesis 1983, 03 ALJ
• Argon, A.S. Strengthening mechanisms in crystal plasticity.OUP, 2008. 54 ARG (2nd copy)
• Ashby, M.F. Materials selection in mechanical design. Pergamon Press, 1992. 56 ASH
• Beylerian, George M. & Dent, Andrew, Ultra materials : how materials innovation is changing the world, 57 BEY, Thames & Hudson, 2007.
• Brandon, David & Kaplan, Wayne D. Microstructural characterization of materials - 2nd ed. Wiley, 2008. 34 BRA/2 Library Office
• Chen, C. Julian, Introduction to scanning tunnelling microscopy – 2nd ed. OUP, 2008. 34 CHE Library office
• Christensen, K. N. Electron microscope studies of oxygen implanted silicon. DPhil Thesis 1990. 03 CHR
• Cullis, A G, Staton-Bevan, A. E., Hutchinson, J.L (eds), Microscopy of semiconducting Materials 1993, Institute of Physics (134) 1993, 05 IP 1993/ 134
• Cullis, A. G. & Staton-Bevan, A. E. (eds), Microscopy of semiconducting Materials 1995 Institute of Physics (146) 1995, 05 IP 1995/146
• Cullis, A G & Hutchinson, J L (eds), Microscopy of semiconducting materials 1997 Institute of Physics (157) 1997, 05 IP 1997 / 157
• Cullis, A G & Beanland, R (eds), Microscopy of semiconducting Materials 1999 Institute of Physics ( 164) 1999, 05 IP 1999/ 164
• Dieter, George Ellwood.:Bacon, D. J., Mechanical metallurgy. :SI metric ed. / adapted by David Bacon. 50 DIE/2D
• Dorset, Douglas L. Hovmöller, Sven and Zou ,Xiaodon, Electron crystallography, NATO ASI series. Series E, Applied sciences ; no. 347. 05 NATO 1997/1
• Duggan, Alice, The structure of glasses and amorphous materials. 2005. Part II Thesis 03 DUG
• Feagin, James M. Quantum methods with mathematica, Springer, Telos, 1994. 10 FEA
• Forrest, David, Magnetic nanoparticles and nanocomposites for information storage 2005. Part II 03 FOR/2
• Fraser, Keith Scanning tunnelling microscopy of fullerene dimmers, 03 FRA/5 Part II Thesis
• Freund, Michael S. & Deore, Bhavana, Self-doped conducting polymers, John Wiley & Sons, Ltd. 2007 45 FRE
• Gaskell, David R. Introduction to the thermodynamics ofmaterials – 5th ed.Taylor & Francis, 2008 1 in main library 1 in Library office. . 50 GAS/F
• Higgins, R. A. Engineering metallurgy 1. Applied physical metallurgy 5th ed. Edward Arnold, 1983. 50 HIG/aD
• Holden, Melissa F B., Understanding the properties of semi-solid 6063 alloys during rheocasting, Part II Thesis, 03 HOL/6
• Kirkby, Eva, High electric fields in thin SiO2 films. 2004. Part II Thesis, 03 KIR/1
• Knott, J. F. :Withey, P. A. Knott, J. F. Fracture mechanics : worked examples, 2nd ed;.IoM 54 KNO/3
• Karney, Graeme Collagen-elastin scaffolds for heart valve replacement, 03 KAR/1 Part II Thesis
• Kolasinski, Kurt W., Surface science : foundations of catalysis and nanoscience – 2nd ed. Wiley, 2008. 40 KOL Library office
• Landolt, Dieter, Corrosion and surface chemistry of metals, EPFL Press, 2008. 43 LAN
• MacBride, Julian, Materials for cartilage engineering scaffolds, Part II Thesis 2006. 03 MAC/7
• Martin, J.W. (ed), Concise encyclopedia of the properties of materials surfaces and interfaces. Elsevier, 2008, 01 MAR/4
• Martin, J.W. (ed), Concise encyclopedia of the Structure of Materials, Elsevier, 2007. 01 MAR/1 Library office
• McVitie, S. & McComb, D. (eds), Electron microscopy and analysis 2003, Institute of Physics (179) 2004, 05 IP 2003/ 179
• Mills, N. J. (Nigel J.), Plastics : microstructure, properties and applications Edward Arnold, 1986, 45 MIL/3
• Minshull, James, The effects of high temperature damage on the strength of float glass. 2006 Part II Thesis, 03 MIN/3
• Paus, Karl Christian, The electron microscopy of silicon on sapphire materials, DPhil 03 PAU
• Powell, Andrew, Growth and characterisation of metallicnanoislands; palladium on strontium titanate, Part II Thesis, 03 POW
• Pritchard, J.G., Poly (vinyl alcohol) : basic properties anduses. MacDonald Technical I Scientific, 1970. 45 PRI (F11)
• Randle, Valerie & Engler, Olaf, Introduction to texture analysis : macrotexture, microtexture & orientation mapping. CRC Press, 2000. 30 RAN/1
• Roberts, Martin Ceredig, Electron microscopy of vlsi mos devices, DPhil Thesis 1985, 03 ROB/4
• Robinson, Jennifer, Part II, Mechanisms and control of microsuperplasticity, 03 ROB/5
• Royal Microscopical Society (Great Britain), Conference :(2001 : Oxford, England), Microscopy of semiconducting materials 2001:proceedings of the Royal Microscopical Society Conference,Oxford University,25-29 March 2001 / edited by A.G. Cullis and J.L. Hutchison .Institute of Physics conference series ; 169, 05 IP 2001/169
• School Mathematics Project, Advances Tables – 3rd edition, CUP, 1979. 2 copies 1 office, 11 SMP Reference
• Shapiro, Ian, Grain boundary segregation in and mechanical properties of A12O3/SiC nanocomposites. D Phil Thesis. 2006. 03 SHA/11
• Stewart, C.P. Structural and electrical studies of selenium and silicon ion implanted gallium materials, DPhil 1985, 03 STE/7
• Stowe, David J. An investigation of efficient temperature luminescence from silicon which containsdislocations. DPhil, 03 STO/3
• Todorovic, Milica, Current-related structural transformations in nanostructures, 2006, DPhil Thesis, 03 TOD/2
• Trott, Michael. The mathematica guidebook for graphics, Springer, 2004 ( includes disc), 10 TRO
• van Oss, Carel J. Interfacial forces in aqueous media. Taylor & Francis, 2006. 40 VAN
• Wang, Hongzhi, Perovskite based ceramic nanocomposites, DPhil 2006. 03 WAN/1

Books added to the Library January- March 2008

• Annual Review of Materials Research v.37 2007.
• Argon, A.S. Strengthening mechanisms in crystal plasticity: Oxford University Press, 2008. 54 ARG Library Office.
• Arshady, Reza. Science and Medical style guide. Kentus Books, 2006. 04-1 SMSG.
• Baker, T.N. (ed). Titanium technology in microalloyed steels. Institute of Materials, 1997. 05 IOM 1994.
• Barraclough, K.C. Steelmaking: 1850 - 1900 Institute of Metals, 1990. 16 BAR.
• Bhadeshia, H.K.D. Bainite in steels: transformations, microstructure and properties - 2nd ed. 2001. Institute of Materials Communication Ltd. 50 BHA/1.
• Blinder, S.M. Introduction to quantum mechanics in chemistry, materials science and biology. Elsevier. 2004. 40 BLI (2 copies).
• Bodsworth, C. (ed). British iron and steel AD1800 - 2000 and beyond. IOM, 2001. 16 BOD.
• Bodsworth, C. (ed). Sir Henry Bessemer: Father of the steel industry. IOM Communications Ltd, 1998. 16 BOD/1.
• Cantor, Brian, Grant, Patrick, Johnston, Colin. Automand novel materials. Taylor and Francis, 2008, Library Office. 56 CAN.
• Cotrell, Sir Alan. An introduction to metallurgy - 2nd ed. (1995 reprint). 50 COT/3 x 2.
• Cowie, J.M.G and Arrighi, Valeria. Polymers: chemistry adn physics of modern materials. 3rd ed. CRS Press, 2008. 45 COW/1 Library Office.
• Doig, Alistair. Military metallurgy. Maney for the Institute of Materials, 2002. (Reprinted with corrections). 57 DOI.
• Fomin, Gennady. Encyclopaedia of international corrosion standards. Maney for IMMM. 2003. 01 FOM Reference.
• Fukai, Y. The metal-hydrogen system: basic bulk properties. 2nd ed. 2005 Springer. 24 FUK
• Gabrys, Barbara J. Applications of neutron scattering to soft condensed matter. Gordon and Breach, 2000. 31 GAB.
• Gladman, T. Grain size control. Maney for the Institute of Materials, Minerals and Mining. 2004. 30 GLA.
• Goodhew, Peter J., Humphreys, John Beanland, Richard. Electron microscopy and analysis - 3rd ed,. Taylor and Francis, 2001. 32 GOO/2.
• Grong, Oystein. Metallurgical modelling of welding - 2nd ed. Institute of Materials, 1997. 56 GRO
• Hillert, Mats. Phase equilibria, phase diagrams and phase transformations: their thermodynamic basis. 2nd ed. 2008. 53 HIL.
• Hughs, Thomas J.R. The finite element method. Dover, 2000. 10 HUG PL MML.
• Lukas, Hans Leo et al. Computational thermodynamics. CUP, 2007. 53 LUK.
• Mattsson, Einar. Basic corrosion technology for scientists and engineers. 2nd ed. IOM, 1996. 43 MAT.
• Narasimhan, B., Mallapragada, S.K. Porter, M.D. (eds). Combinatorial materials science. Wiley. 2007. Library Office 50 NAR.
• Ohring, Milton. Materials science of thin films: deposition and structure - 2nd ed. Academic Press, 2002. Library Office. 21 OHR.
• Press, William et al. Numbeical recipes: the art of scientific computing - 3rd ed. 2007. 12 PRE/4.
• Rahaman, Mohamed N. Sintering of ceramics, CRC Press. 2008. Library Office. 44 RAH/2.
• Rao, C.N.R., Muller, A., Cheetham, A.K. Nanomaterials chemistry: recent developments and new directions. Wiley-VCH, 2007. 58 Rao/2.
• Soblev, V.V., Guilelmany, J.M. and Nutting, J. High velocity oxy-fuel spraying. Institute of Materials, Minerals and Mining, 2004. 34 SOB.
• Sperling, L.H. Introduction to physical polymer science - 4th ed. 2006. Wiey. 1 kept in Library Office. 45 SPE/2. 2 copies.
• Streetman, Ben G. and Banerjee, Sanjay Kumar. Solid state electronic devices - 6th ed. Pearson Prentice Hall, 2006. Library Office. 21 STR/1E.
• Tylecote, R.F. The prehistory of metallurgy in the British Isles. Institute of Metals 1986. 16 TYL.
• Xu, Jinghui. Field effect on zwitterionin telechelic polymers (ZTPs) nanostructure, 2006. 03 XU DPhil.
• Wilson, Robert. A practical approach to continuous casting of copper-based alloys and precious metals. IOM, 2000. 56 WIL/1.

Books added to the Library September - December 2007

• Ågren, John et al: Thermodynamics and phase transformations: The selected works of Mats Hillbert. EDP Science, 2006. 53 AGR
• AA Road Atlas of Great Britain 1999 Automobile Association, 1998. 07 AA/GB
• ASM International Atlas of stress-strain curves – 2nd ed. ASM International, 2002. 01 Boy/1 Ref
• Barnes, Dunstan High resolution stress measurement in structural ceramics using photo-and cathode-luminescence, 2006. 03 Bar/7
• Bath, Jasbir (ed): Lead-free soldering. Springer, 2007. 56 BAT Library Office
• Blinder, S M: Introduction to quantum mechanics in chemistry, materials science and biology 4 copies. 40 BLI (1 copy library office)
• Castro, Lucia Diaz: The effect of environment in the mechanical properties of polymers, D.Phil 2006 03 CAS
• Chiellini, Emo et al (eds): Biorelated polymers. Kluwer Academic/Penum Publishers, 2001. 05 ICBT
• Chorkendorff, I. Niemantsverdriet, J.W.: Concepts of modern catalysis and kinetics. 2nd revised and enlarged edition. Wiley-VCH VErlag Gmbh & Co, 2007. 42 CHO
• B.D. Cullity, S.R.: Stock Elements of x-ray diffraction. 3rd ed. Prentice Hall, 2001. 31 CUL/J Library office
• De Graef, Marc & McHenry, Michael E.: Structure of materials: an introduction to crystallography, diffraction, and symmetry. CUP, 2007 3 copies. 1 Library, 1 faculty. 30 DEG 1Library Office.
• Edwards, Lyndon & Endean, Mark (eds: Manufacturing with materials. + data cards. Open University/Butterworth Heinmann, 1999. 50 MAS/4. Data sets kept in office.
• Gasiorowicz, Stephen Quantum physics – 3rd ed. John Wiley & Sons, 2003. 20GAS/D - Library office.
• Ghosh, Ahindra Secondary steelmaking: principles and applications. CRC Press, 2001. 51 GHO Library Office.
• Haasen, Peter: Physical metallurgy – 3rd ed. CUP, 1996. 2 copies 1 Library office, 1 main Library. 50 HAA/3.
• Hayward, David O. Quantum mechanics for chemists. RSC, 2002. 2 copies. 40 HAY 1 copy library Office.
• Jiles, David: Introduction to magnetism and magnetic materials. – 2nd ed. Taylor & Francis, 1998. 21 JIL/3 Library Office.
• King, Oliver N.F.: Studies on the electrodeposition of calcium phosphate coatings for orthopaedic applications and the potential incorporation of apatite-coated lipsomes. DPhil 2006. 03 KIN/6.
• Lange, K. Robert (ed): Surfactants : a practical handbook. Hanser Publishers, 1999. 40 LAN/1.
• Nicholson, John W.: The chemistry of polymers. 3rd ed. RSC Publishing, 2006. 2nd copy library office. 45 NIC.
• Nijs, Johan F A (ed): Advanced silicon and semiconducting silicon-alloy based materials and devices. Institute of Physics Publishing, 1994. 21 NIJ.
• O’Handley, Robert C. Modern magnetic materials : principles and applications. – John Wiley & Sons, 2000. 21 OHA - 1 Library Office.
• Randle, V: The measurement of grain boundary geometry. Institute of Physics Publishing,1993. 30 RAN.
• Shi, Donglu, editor Introduction to biomaterials Tsinghua University Press/World Scientific, 2006. 45 SHI Library Office.
• Singh, Jasprit: Electronic and optoelectronic properties of semi-conductor structures. CUP, 2003. 21 SIN/1.
• Smallman, R. E., Ngan, A.H.W.: Physical metallurgy and advanced materials. 7th ed Elsevier Butterworth-Heinemann, 2007. 50 SMA/F Library Office.
• Srimanosaowapak, Sompong: Precipitation and sedimentation of particles in molten aluminium alloys. 03 SRI.
• Trent, Edward M.& Wright, Paul K.: Metal cutting – 4th ed. Butterworth-Heinemann, 2000. 56 TRE/1 Library office.
• Vieth, Wolf R.: Diffusion in and through polymers. Hanser Publishers, 1991. 45 VIE (F11).

Books added to the Library April - July 2007

• Anderson, James A. & Fernándes García, Marcos (eds) : Supported metals catalysis. Imperial College Press, 2005. 50 AND/3
• Ashby, Michael, Shercliff, Hugh, Cebon, David : Materials Engineering, science, processing and design Elsevier/Butterworth-Heinemann, 2007.56 ASH/4 x3 (1 copy Library office)
• Birks, N., Meier, Gerald H. & Pettit, Frederick : Introduction to the high-temperature oxidation of metals -2nd ed. Cambridge University Press, 2006. 50 BIR/2
• Briceño-Gomez, Martha Mercedes : Microstructural investigation of a rapidly solidified UHSsteel. DPhil 2005. 03 BRI/3
• Chen, Xianfeng : Dimensionally confined semiconductors. DPhil 2006. 03 CHE/4
• Clarson, Stephen & Semlyen, J. Anthony : Siloxane Polymers. PTR Prentice Hall, 1993.45 CLA
• Dubois, Jean-Marie : Useful quasicrystals. World Scientific, 2005. 30 DUB
• The Education Authorities Directory and Annual2007 08 EAD PL- MJC
• Eggeman, Alexander Stuart : Design and fabrication of extreme refractive index materials. DPhil 2006 03 EGG/1
• Gladman, T. : Grain size control. Maney, 2004. 30 GLA
• Groza, Joanna R. et al (eds) : Materials processing handbook CRC Press/Taylor & Francis, 2007, 04-1 GRO
• Hinchliffe, Claire : Processing and properties of nanocomposite dielectric films. DPhil 2006 03 HIN/2
• Howells, David : Vacuum deposited coatings on polyester films. DPhil 2006. 03 HOW/4
• Jones, Mark A.G. : Luminescent erbium metallofullerences for quantum information processing DPhil 2006 03 JON/9
• Kang, Yonglin Bo ban pi lian zha gang de zu zhi xing nengkong zhi (Continuous casting and rolling of steel for thin plate) Metallurgical Industry Publishing House, Beijing, 2006 56 KAN Faculty Loan
• Koch, Carl C. (ed) : Nanostructured materials : processing, properties, and applications. 2nd ed.William Andrew Publishing, 2007 40 KOC
• Langa, Fernando & Nierengarten, Jean-Francois (eds) : Fullerenes : principles and applications . RSC, 2007. 40 LAN
• Martin, J.W. (ed) : Concise encyclopaedia of the structure of materials. Elsevier, 2007. 01 MAR/1 Reference
• Martin, J.W. (ed) : Concise encylopedia of the chemical properties of materials. Elsevier, 2007 01 MAR/2 Reference
• Martin, J.W. (ed) : Concise encylopedia of the mechanical properties of materials. Elsevier, 2007 01 MAR/3 Reference.
• Roduner, Emil : Nanoscopic materials : size-dependent phenomena RSC, 2006. 58 ROD
• Stanek, William R. : Microsoft Windows command-line Microsoft Press, 2004. 12 STA Faculty Loan
• Thomas, J.M. & Thomas, W.J. : Principles and practice of heterogeneous catalysis. VCH, 1997. 50 THO/1
• Whyte, Edward Peter : Ageing of organically coated metal surfaces. DPhil 2005.03 WHY.

Books added to the Library January - March 2007

• Advanced materials - 2003, Dr A.Q. Khan Research Laboratories Kahuta, 2003, 05 AM-2003
• Daura, Gail D., Engineering ethics: an industrial perspective, Elsevier Academic Press, 2006. 57 BAU Library Office
• Bell, T. (compiled by) Perspectives in ferrous metallurgy: dedicated to Walter S. Owen on the attainment of his 65th birthday. Pergamon Press, 1985. 51 BEL Library Office
• Bishop, Charles A. Vacuum deposition onto webs, films, and foils. William Andrew Publishing, 2007. 21 BIS Library Office
• Bond, G.C., Louis, C., Thompson, David T. Catalysis by gold. Imperial College, 2006. 42 BON
• Buchholz, F.L. and Peppas, N.A. (eds). Superabsorbent polymers: science and technology. ACS, 1994. 05 ACS 1983/2
• Copper Development Association. Design in brass. CDA, 1986. 52 CDA/4
• Crepeau, Dr Paul N. (ed). Light metals 2003. Proc of the technical sessions presented by the TMS Aluminium Committee. TMS, 2003. 05 TMSAC - 2003
• DeHoff, Robert. Thermodynamics in materials science. - 2nd ed. Taylor and Francis, 2006. 50 DEH
• Gerdeen, James C., Lord, Harold W. and Rorrer, R. Engineering design with polymers and composites. CRC/Taylor and Francis, 2006. 45 GER
• Hawkes, Peter W. and Spence, John C.H. (eds). Science of microscopy vols 1 and 2. Springer, 2006. 32 Haw/a and 32 HAW/b Library Office
• Hosford, William F. Materials Science an intermediate text. CUP, 2007. 50 HOS
• Jiles, David. Introduction to the electronic properties of materials. -2nd ed. Nelson Thornes, 2001. 21 JIL/3 Library Office
• Kaplan, Howard I. (ed). Magnesium technology 2003. TMS, 2003. 05 TMS 2003/1
• Kim, Y-W, Clemens, H. Rosenberger, A.H. (eds). Gamma Titanium aluminides 2003. TMS, 2004. 05 TMS 2003
• Lorimer, G.W. (ed). Phase Transformations '87. Institute of Metals, 1988. 05 IOM/1987
• Michler, G.H. and Balta-Calleja (eds). Mechanical properties of polymers based on nanostructure and morphology. CRS/Tayhor and Francis, 2005. 45 MIC Library Office
• Nabarro, F.R.N. Dislocations in solids vol 3 Moving dislocations NHC, 1980/ 54 NAB/ v.3
• Nicholson, John W. The chemistry of polymers - 3rd ed. 2006. RSC Publishing. 45 NIC
• Pilling, J and Ridley, N. Superplasticity in crystalline solids. Institute of Metals, 1989. 30 PIL
• Provder, Theodore (ed). Computer applications in applied polymer science II ACS, 1998. 05 ACS 1988
• Rao, C.N.R. and Govindaraj, A. Nanotubes and nanowires RSC Publishing, 2006. 58 RAO/1
• Reed, Roger C. The Superalloys fundamentals and applications CUP, 2006. 52 REE Library Office
• Russell, Alan M, Lee, Kok Loong. Structure-property relations in nonferrous metals. Wiley Interscience, 2005, 52 RUS
• Solymar, L and Walsh, D. Electrical properties of materials - 7th ed. OUP, 2004. 21 SOL/2; 21 SOL/2A Library Office
• Trilley, Richard. Crystals and crystal structures. John Wiley and Sons, 2006 30 TIL/3
• Woodford, Chris... et al. Cool stuff and how it works. Dorling Kindersley, 2005 57 WOO
• Youyi, Chu, Hsu, T.Y., Ko, T. (eds). Shape memory alloy '86: proceedings of the International Synposium on shape memory alloys. China Academic Publishers, 1986. 05 SMA 1986

Books added to the Library October - December 2006

• Barrett, Jack, Atomic structure and periodicity, RSC. 40 BAR
• Barrett, Jack, Structure and Bonding, RSC. 40 BAR/1
• Bhatnagar, Ashok (ed), Lightweight ballistic composites. CRC/Woodhead Publishing Ltd. 2006. 57 BHA Library Office
• Blumich, Bernhard, Kuhn, Winfried (eds). Magnetic resonance microscopy, VCH, 1992. 05 NMR 1991
• Bunsell, A.R. and Renard, J. Fundamentals of fibre reinforced composite materials. IOP Publishing Ltd., 2005. 45 BUN
• Carraher, Charles E. Introduction to polymer chemistry. Taylor Francis, 2007. 45 CAR/1 Library Office
• Carter, Robin. Structural analysis of semiconductor compounds in single-walled carbon. DPhil 03 CAR/8
• Czichos, Horst, Saito, T. Smith, L.R. (eds). Springer Handbook of materials measurement methods. Springer, 2006. 04-1 CZI REFERENCE
• Dark, C.J. The correlation of grain coundary chemistry and structure with electrical properties in high temperature superconducting thin films. DPhil 2005. 03 DAR/1
• Fuchs, G.E.... et al (eds). Advanced materials and processes for gas turbines. TMS, 2002. 05 ECI
• Giannuzzi, Lucille A. and Stevie, Fred A. (eds). Introduction to focused ion beams: instrumentation theory, techniques and practive. Springer, 2005. 32 GIA
• Hayward, David O. Quantum mechanics for chemists. RSC. 40 HAY
• Hill, Jorg-Rudiger, Subramanian, L. and Maiti, A. Molecular modelling techniques in materials sciences. Taylor Francis, 2006. 12 HIL Library Office
• Kasap, Safa, Capper, Peter (eds). Springer handbook of electronic and photonic materials. Springer, 2006. 04-1 KAS Reference
• Kaw, Autar K. Mechanics of composite materials - 2nd ed. CRC Taylor and Francis, 2006. 44 KAW
• Mansoori, G. Ali. Principles of nanotechnology. World Scientific, 2005. 58 NAM Library Office
• Martinez-Duart, J.M., Martin-Palma, R.J. and Agullo-Rueda, F. Nanotechnology for microelectronics and optoelectronics Elsevier, 2006. 21 MAR/1
• Moody, N.R... et al (eds). Hydrogen effects on material behaviour and corrosion deformation interactions. (International Conference) TMS, 2002. 05 ICHEMBCDI
• Moore, Edward P. The rebirth of polypropylene supported catalysts. Hanser Publishers, 1998. 16 Moo (F11)
• Morais, Ana de. Giant magnetoresistance in spin valves with artificial antiferromagnets, DPhil 2004. 03 MOR/10
• Murphy, J.D. The properties of nitrogen and oxygen in silicon. DPhil 2006. 03 MUR/3
• Nicholls, Rebecca Jane. Electron energy loss spectorsopy of fullerene. DPhil 2006. 03 NIC/3
• Pepper, Darrell W. and Heinrich, Juan C. The finite element method - 2nd ed. Taylor and Francis, 2006. 10 PEP PL-MML
• Prasad, Paras (ed). Frontiers of polymers and advanced materials. Plenum Press, 1994. 45 PRA (F11)
• Russey, William E., Ebel, Hans F. and Bliefert, Claus. How to write a successful science thesis. Wiley-VCH, 2006. 04-1 RUS
• Scott, Gerald (ed). Degradable polymers: principles and applications - 2nd ed. 2002. Kluwer Academic Publishers, 2002.
• Seddon, John M. and Gale, Julian D. Thermodynamics and statistical mechanics RSC. 20 SED
• Sun, Sam-Shajing and Sariciftci, Niyazi Serdar. Organic photovoltaics. Taylor and Francis, 2005. 21 SUN
• Sze, S.M. and Ng, Kwok K. Physics of semiconductor devices - 3rd ed. John Wiley, 2006. 21 SZE/1 Library Office
• Tjong, S.C. Nanocrystalline materials: their synthesis-structure-property relationshiops and applications. Elsevier, 2006. 58 TJO
• Urban, Dieter and Takamura, Koichi (eds). Polymer dispersions and their industrial applications. Wiley-VCH, 2002. 45 URB (F11)
• Whiteley, Richard. Electro-epitaxial buffer layers for second generation high temperature superconductor tapes. DPhil 2005. 03 WH1/2
• Wilson, E.A. Worked examples in the kinetics and thermodynamics of phase transformations. Institute of Metallurgists, 10 WIL/1

Books added to the Library July - September 2006

• ASM Handbook, Volume 13C Corrosion: environments and industries, 04-1 ASM/13C
• Annual review of materials research, vol. 36 2006
• Bar-Cohen, Yoseph (ed),
• Biomimetics: biologically inspired technologies, CRC, 2006, 57 BAR
• Bhadeshia, H.K.D.H. and Honeycome, R.W.K. Steels: microstructure and properties - 3rd ed. 2006, 51 BHA (Library Office) 51 BHA/1
• Bromwich, Thomas Joseph, The development and characterisation of magnetic nanodots for information storage applications, 03 BRO/11
• Buch, Alfred, Short handbook of metal elements properties and elastic properties of pure metals 3rd ed. 2005, 04-1 BUC/1A
• Hutchings, Michael T., Introduction to the characterization of residual stress by neutron diffractions. Taylor Francis, 2005, 31 HUT
• International Iron and Steel Institute, World Steel in Figures 2006, 51 IISI 2006
• Low, I.M. (ed), Ceramic matrix composites. CRC/Woodhead Publishing, 2006, 44 LOW (office)
• MacGregor, E.A. and Greenwood, C.T., Polymers in nature. Wiley., 45 MCC
• Nieh, T.G., Wadsworth, J. and Sherby, O.D., Superplasticity in metals and ceramics CUP, 1997., 54 NIE
• Ottenbrite, Raphael M. (ed), Polymeric drugs and drug administration. American Chemical Society, 1994., 45 OTT
• Park, Joon B. and Bronzino, Joseph D. (eds). Biomaterials principles and applications. CRC Press, 2003. 45 PAR/2
• Shen, Y.R. The principles of nonlinear optics. Wiley-Interscience, 2003. 33 SHE PL-FIM Lab
• Smith, E. Brian. Basic chemical thermodynamics - 5th ed. 2004. Imperial College Press. 40 SMI/D
• Solid State Physics vol 60, 02 SSP/2006
• Stein, Richard S. and Powers, Joseph. Topics in polymer physics, 45 STE/1

Books Added to the Library April - June 2006

• Barsoum, M.W. Fundamentals of ceramics, Institute of Physics, 2003 (44 BAR)
• Belov, Nikolay A., Nulticomponent phase diagrams: applications for commercial aluminium Alloys. Elsevier, 2005 (52 BEL)
• Braun, D..... et al, Polymer synthesis theory and practice: fundamentals Methods, experimental. Springer, 2005 (45 BRA (Office))
• Callister, William D. Jr., Materials science and Engineering: an introduction - 7th ed. Wiley and Sons, 2007 (50 CAL/B (Office))
• Education Authorities Directory 2006 (08 EAD 2006 PL - MC)
• Machlin, E.S. Materials science in microelectronic 1. The relationship between thin film processing and strucuture - 2nd ed. Elsevier, 2005 (21 MAC/1)
• Martin, John, Materials for Engineering, Woodhead Publishing, CRC Press, 2006. - 3rd ed. (50 MAR/4 (Office))
• Odian, George, Principles of polymerization - 4th ed. Wiley, 2004 (45 ODI
• Richerson, David W. Modern ceramic engineering - 3rd ed. Taylor & Francis, 2006 (44 RIC/A1)
• Polmear, Ian, Light alloys from traditional alloys to nanocrystals. Elsevier, 2006 - 4th ed. (52 POL/I
• Smalley, Martin, Clay swelling and colloid stability, CRC Taylor Francis, 2006 (40 SMA)
• Sze, S.M. (ed), VLSI technology, McGraw-Hill, 1988. - 2nd ed. (21 SZE/3 (Office))

Books Added to the Library January - March 2006

• Briggs, Andrew. An introduction to scanning acoustic microscopy OUP, 1985 (32 BRL/1B Library office)
• Bueren, H.G, van, Imperfections in crystals - 2nd ed. North-Holland Publishing Co., 1961
• Clough, Roger L. & Shalaby, S.W. (eds), Irradiation of polymers: fundamentals and technological applications. American Chemical Society, 1996, (45 CLO)
• Copper Development Association, Equilibrium diagrams CDA, (52 CDA/2)
• Copper Development Association, Introduction to copper. 1988, (52 CDA/3; 52 CDA/3A)
• Dove, Martin T., Structure and dynamics: an atomic view of materials, (30 DOV/1 Library office)
• Eliseeva, V.I. et al, Emulsion polymerisation and its applications in industry, Consultants Bureau, 1981, (45 ELI/1)
• Frost, Harold J. & Ashby, Michael, Deformation-mechanism maps, Pergamon Press, 1982, (54 FRO/2B Library office)
• Fujita, F.E. (ed), Physics of new materials, Springer-Verlag, 1994, (22 FUJ)
• Gilchrist, J.D., Extraction metallurgy. - 3rd ed., Pergamon Press, 1989, (41 GIL/B Library office - 2 copies
• Glass, J. Edward Donation, Hydrophilic polymers: performance with environmental acceptantce, American Chemical Society, 1996, (45 GLA/2)
• Gustavson, K.H., The chemistry and reactivity of collagen, Academic Press, 1956, (40 GUS)
• Harland, Ronald S. (ed), Polyelectrolyte gels (ACS Symposium series 480), American Chemical Society, 1992, (45 HAR/1)
• Hirsch, Peter....et al, Electron microscopy of thin crystals. 2nd rev. ed., Robert E. Krieger Publishing Company, 1977
• Hongu, Tatsuya and Phillips, Glyn O., New Fibres., Ellis Horwood, 1990, 64, (45 HON)
• Ise, Norio & Tabushi, Iwao (eds), An introduction to speciality polymers CUP, 1983, (45 ISE)
• Ivin, K.J. & Mol, J.C., Olefin metathesis and metathesis polymerisation, Academic Press, 1997, (45 IVI)
• Kelly, John M.....et al (eds), Photochemistry and polymeric systems, Royal Chemistry Society, 1993, (45 KEL)
• Lea, Colin & Fuller, Hilary, A celebration of 100 years of Materials Research at the National Physical Laboratory. HMSO, (16 LEA)
• Mark, Herman F., From small organic molecules to large: a century of progress. American Chemical Society, 1993, (16 MAR)
• McCormick, Charles L. (ed), Stimuli-responsive water soluble and amphiphilic polymers. American Chemical Society, 2001, (45 MCC/4)
• The Metals Society. Basic oxygen steelmaking - a new technology emerges? Metals Society, 1978, (05 MS 1978/4)
• Minkoff, I., The physical metallurgy of cast iron. John Wiley & Sons, 1983, (51MIN/A)
• Nisbet, T.S. Rolling bearings. Design Council, 1974, (56 NIS)
• Nishiyama, Zenji. Martensitic transformation. Academic Press, 1978, (54 NIS/B)
• Ozin, Geoffrey A. & Arsenault, Andre C. Nanochemistry: a chemical approach to nanomaterials. RSC Publishing, 2005, (40 OZI)
• Parker, R.H. An introduction to chemical metallurgy - 2nd ed SI/Metric Units, Pergamon Press, 1978, (40 PAR/1A)
• Pickering, F.B. Physical metallurgy and the design of the steels. Applied Science Publishers, 1978 (repr. 1983), (51 PIC/D)
• Poirier, Jean-Paul. Creep of crystals. CUP, 1985, (30 POI/A Library office)
• Risch, Sara J. (ed). Food packaging: testing methods and applications. American Chemical Society, 2000, (57 RIS)
• Roberts, P.M. Brazing. Design Council, 1975, (56 ROB)
• Rosenqvist, Terkel. Principles of extractive metallurgy - 2nd ed. McGraw-Hill, 1983
• Saito, R., Dresselhaus, G. & Dresselhaus, M.S. Physical properties of carbon nanotubes. Imperial College Press, 1998, (40 SAI)
• Sullivan, C.P., Donachie, M.J. & Morral, F.R. Cobalt-base superalloys - 1970, Centre D'information du Cobalt, 1970, (52 SUL/3A)
• Thwaites, C.J. & Barry, B.T.K. Soldering. Design Council, 1975, (56 THW/1)
• Trent, E.M. Metal cutting - 3rd ed. Butterworth-Heinemann, 1991
• Vakula, V.L. & Pritykin, L.M. Polymer adhesion: basic physico-chemical principles. Ellis Horwood, 1991, (45 VAK)
• Warner, Steven B. Fiber science. Prentice Hall, 1995, (45 WAR/1A)
• West, E.G. The selection and use of copper-rich alloys. Design Council, 1979, (52 WES/1A)

Books Added to the Library October - December 2005

• Anderson, T.L. Fracture mechanics:fundamentals and applications 3rd ed. 2005. (54 AND)
• Annual review of materials research v.35 2005. (02 ARM/35 2005)
• Ashby, Michael F. & Jones, David R. Engineering Materials 2-3rd ed. 2006. Elsevier, 2006. (50 ASH/4 Library Office)
• ASM Handbook Volume 14 A Metalworking: Bulk forming. (04-1 ASM/14A REF)
• Baddley, D.F. & Cannon, J.A. Hodder & Stoughton, 1998. (50 BAD)
• Balluffi, Robert W., Allen, Samuel M. Carter, W. Craig Kinetics of materials. Wiley, 2005. (50 BAL)
• Buchanan, Relva C. (ed) Ceramic materials for electronics - 3rd revised ed. (44 BUC)
• Chiang, Yet-Ming, Birnie, Dunbar P. III, Kingery, W. David Physical ceramics. (44 CHI)
• The Donald McLean Synposium Structural materials; engineering application through scientific insight. Insitute of Materials. (05 DM)
• Friedrich, Horst E, & Mordike, Barry L. Magnesium Technology : metallurgy, design data, applications Springer, 2004. (52 FRI)
• Jenkins, C.H. & Khanna, S.K. Mechanics of materials : a modern integration of mechanics and materials in structural design. Elsevier, 2005. (50 JEN)
• Kaibyshev, Oscar A. & Utyashev, Farid Z. Superplasticity : microstructural refinement and superplasticroll forming. Futurepast, 2005. (50 KAI)
• Klueh, Ronald L. & Harries, Donald R. High-chromium ferritic and martensitic steels for nuclear applications. ASTM (51 KLU)
• Koch, W. Hotthausen, Max C. A chemist's guide to density functional theory - 2nd ed 2002. (PL-MML) (40 KOC)
• Lee, Burtrand & Komarneni, S. (eds) Chemical processing of ceramics - 2nd ed. 2005 (44 LEE/2)
• Lutjering, Gerd & Williams, James C. Titanium. Springer, 2003. (52 LUT)
• Martienssen, W & Warlimont, H. (eds) Springer Handbook of condensed matter and materials data 2005. (04-1 MAR)
• McCracken, Garry & Scott, Peter Fusion : the energy of the universe Elsevier (25 McC)
• Mills, N.J. Plastics microstructure and engineering applications 3rd ed. (45 MIL/2)
• Nutting, J. & Viswanathan, R. (eds) Clean steel : superclean steel Conference proceddings 607 March 1995. Institute of Materials. (05 IM 1995)
• Paul, Harry. Introduction to quantum optics : from light quanta to quatumteleportation. CUP, 2004. (33 PAU)
• Raabe, Dierk et al Continuum scale simulation of engineering materials (12 RAA)
• Rahaman, M.N. Ceramic processing and sintering - 2nd ed. Marcel Dekker 2003. (44 RAH)
• Theodore, Louis, Kunz, Robert G. Nanotechnology : environmental implications and solutions Wiley-Interscience (58 THE)
• Vargel, Christain Corrosion of aluminium. Elsevier. (43 VAR)
• Yip, Sidney (ED) Handbook of materials modelling Parts A and B Springer, 2005. (04-1 YIP Faculty Loan MML

Books Added to the Library June 2005 - Sept 2005

• Anderson, J.C. et al Materials science for engineers. 5th ed. 2003. (50 AND/2)
• Ashby, Mike & Johnson, Kate. Materials and design: the art and science of material selection in product design.2002.Elsevier Butterworth Heinemann (56 ASH/3)
• Ashby, Michael F. Materials selection in mechanical design.3rd ed. Elsevier Butterworth Heinemann, 2005 (56 ASH/2)
• Ashby, Michael F. & Jones, David R.H. Engineering materials 1. 3rd ed. 2005.(50 ASH/3)
• Barber, Zoe H. (ed) Introduction to materials modelling. Maney, 2005 (12 BAR/1)
• Boas, Mary L. Mathematical methods in the physical sciences 3rd ed. (10 BOA/1)
• Davies, Geoff Materials for automobile bodies. Elsevier, 2003. (56 DAV/1)
• Di Ventra Massimiliano Introduction to nanoscale science and technology (58 DIV)
• Fursey, George Field emission in vacuum microelectronics. 2005 (21 FUR)
• Köhler, Michael, Fritzsche, Wolfgang Nanotechnology: introduction to nanostructuring techniques (58 KOH)
• Landau, David P. & Binder, Kurt - A guide to Monte Carlo simulations in statistical physics- 2nd ed. 2005. Cambridge University Press. (12 LAN)
• Malhotra, Bansi D. Handbook of polymers in electronics. 2002.Rapra Technology Ltd., (45 MAL)
• Ratner, Buddy D. et al Biomaterials Science 2nd ed. Elsevier (45 RAT)
• Swift, K.G. & Booker, J.D.Process selection : from design manufacture. ed.2003. (56 SWI)
• Waser, Rainer (ed) Nanoelectronics and information technology:advanced electronic materials and novel devices. 2nd ed 2005. (21 WAS/A)

Books added to the Library March - May 2005

• Allen, M.P. & Tildesley, D.J. Computer simulation of liquids (12 ALL/A)
• Andrady, Anthony L. (ed) Plastics and the environment. (45 AND/1)
• Bhattacharya, K. Microstructure of Martensite. (53 BHA)
• Bhushan, B. (ed) Springer Handbook of nanotechnology Springer, 2004. (04-1 BHU Ref)
• Blackley, D.C. Emulsion polymerisation (45 BLA/1) (F11)
• Buckel W.. & Kleiner R. Superconductivity. 2nd rev. ed. (21 BUC/A)
• Butt, Hans-Jürgen, Graf, Heinz. Physics and chemistry of interfaces. (40 BUT)
• Clarke, C. The science of ice cream. (40 CLA)
• Comprehensive Polymer Science v.1 - 7 + suppl 1 & 2 (01 ALL)
• Craver, C.D. & Provder, T. (eds) Polymer characterization (45 CRA)
• Dunn, Richard L. & Ottenbrite, R. M. (eds) Polymeric drugs and drug delivery systems. 45 DUB (F 11)
• Education Authorities Handbook 2005 08 EAD 2005
• Encyclopedia of Polymer Science & Engineering v. 1 -17 + suppl. and index. 01 MAR
• Finnis, Mike Interatomic forces in condensed matter. (12 FIN)
• Frenkel, Daan & Smit, Berend Understanding molecular simulation Academic Press, 2002. 2nd ed. (12 FRE/1)
• Glass, J. Edward & Swift, G. (eds) Agricultural and synthetic polymers (45 GLA) (F11)
• Glass, J. Edward (ed) Water-soluble polymers. (45 GLA/1) (F11)
• Habraken, Joe Microsoft Office XP 8 in 1 (12 HAB)Hinchcliffe, Alan Molecular modelling for beginners. (12 HIN)
• Jackson, Kenneth Kinetic processes. (53 JAC)
• Kittel, Charles Introduction to solid state physics - 8th ed. 2004. (22 KIT/1N)
• Lambourne, Robert & Tinker, Michael Basic mathematics for the physical sciences. (10 LAM)
• Lappa, Marcello Fluids, materials and microgravity. (10 LAP)
• Moulson, A.J. Electroceramics : materials, properties, applications - 2nd ed (44 MOU/1)
• Porter, Robin & Robinson, Mandi The China Business Guide (08 POR)
• Prasas, Paras N. Nanophotonics 58 PRA)
• Rapaport, D.C. The art of molecular dynamics simulation - 2nd ed. CUP, 2004. (12 RAP
• Reed, G. T. & Knights, Andrew P. Silicon photonics (21 REE)
• Rubinson, K.A. & Rubinson, J. Contemporary instrumental analysis (42 RUB) (F11)
• Schlick, Tamar Molecular modelling and simulation (12 SCH/2)
• Shalaby, S.W. et al Polymers as biomaterials. (45 SHA/1) (F11)
• Sullivan, Dennis M. Electromagnetic simulation using the FDTD method (12 SUL)
• Tadros, Th F. (ed) The effect of polymers on dispersion properties (45 Tad) (F11)
• Tinker, Michael & Lambourne, Robert Further mathematics for the physical sciences. (10 TIN)
• Tucker, Nick & Johnson, Mark (eds) Low environmental impact polymers Rapra Technology Ltd, 2004. (45 TUC)
• Ward, I.M. & Sweeney, J. An introduction to the mechanical properties of solid polymers. - 2nd ed. Wiley , 2004. ( 2 copies) (45 WAR/4A)
• Wilks, E. S. (ed) Industrial polymers handbook volumes 1 -4 (04-1- WIL)
• Zweifel, Hans (ed) Plastics additives handbook - 5th ed. 04-1 (ZWE REF)

Books added to the Library Dec 2004 - Feb 2005

• Ajayan, P.M. Nanocomposite science and technology Wiley-VCH, 2004 (58 AJA)
• Callister, William D. Fundamentals of materials science and engineering 2nd ed. 2005(50 CAL/1)
• Callister, William D. Material science and engineering : an introduction 6th ed. Wiley international ed. 2003 (with CD) (50CAL/B)
• Cawse, James N. (ed) Experimental design for combinatorial and high throughput materials. Wiley, 2002. (50 CAW)
• Elias, Hans- Georg An introduction to plastics. 2nd completely revised ed, Wiley-VCH, 2003 (45 ELI)
• Kreyszig, Erwin ; Advanced engineering mathematics - 8th ed, 1999. (10 KRE/D)
• Martin, Richard M. ; Electronic structure. CUP.(21 MAR)
• Poole, Charles P., Owens, Frank J. ; Introduction to nanotechnology, Wiley-Interscience, 2003 (58 POO)
• Rao, C.N.R., Müller, A., Cheetham. A..K. ; The chemistry of nanomaterials volumes 1 and 2 (58 RAO/a)
• Reich, S. Thomsen, C. Maultzsch, J. ; Carbon nanotubes. Wiley-VCH,2004 (40 REI)
• Schmid, Günter (ed) ; Nanoparticles Wiley-VCH GmbH & Co, 2004 (40 SCH/1)
• Smith, E. Brian ; Basic chemical thermodynamics 5th ed. Imperial College Press,2004 (40 SMI/B)
• Wachtman, John B. ; Mechanical properties of ceramics(44 WAC)

Books added to the Library February December 2004

• Bayer, Raymond C. Wear analysis for engineers(54 BAY)
• Ebel, H. et al The art of scientific writing - 2nd ed, 2004 (04-1 EBE)
• Ehrenreich, Henry & Spaepen, F (eds) Solid state physics volumes 58 and 59 (02 SSP/58 02 SSP/59))
• Ernest, W.G. Earth materials (30 ERN)
• Freund, L.B. & Suresh, S. Thin film materials (21 FRE)
• Gale, W.F. & Totemeier, T.C. (eds) Smithells metals reference book 8th ed. 2004 (01-MRB )
• Gusev, A.I. & Rempel, A.A. Nanocrystalline materials(30 GUS)
• Humphreys, F.J. & Hatherly, M. Recrystallization and related annealing phenomena 2nd ed. 2004 (30 HUM)
• Kassner, Michael E. & Pérez-Prado, María Fundamentals of creep in metals and alloys(54 KAS)
• Koningsverd, R. Stockmayer, W.H. & Nies. E. Polymer phase diagrams a textbook.(45 KON)
• Kurz, W. & Fisher, D.J. Fundamentals of solidification 4th revised ed. (53 KUR)
• Leyens, C. & Peters, M. (eds) Titanium and titanium alloys 52 LEY)
• Murray, Raymond L. Nuclear energy - 2nd ed.(SI/metric units) (25 MUR)
• Peng, L-M, Dudarev, S.L. Whelan, M.J., High-energy electron diffraction and microscopy (32 PEN)
• Prassides, K. Fullerene-based materials (40 PRA)
• Sudarshan, T.S., Reitz, W. Stiglich, J.J. (eds) (05TMS)
• Surface modification technologies IX 1995 (1995/2)
• Thompson, D.P. & Mandal, H. (eds) 21st Century ceramics (44 THO)
• Wilson, Alan S. Plasticisers (45 WIL/1)
• World steel in figures 2004 edition (51 IISI 2004)

Books acquired by the Library 01.11.03 - 01.01.04

• Annual review of materials research v.33 (2003) (02 ARMR/33)
• Buschow K.H.J. (ed) Handbook of magnetic materials v.15 (21 WHO/m)
• Giese, Rossman F. & van Oss, Carel J. Colloid and surface properties of clays and related minerals (40 GIE/A)
• Martin, John W. The local chemical analysis of materials (42 MAR)
• Rubinstein, Michael & Colby, Ralph H. Polymer physics (45 RUB)
• Freund L.B. and Suresh S., Thin film materials : stress, defect formation and surface evolution (21/FRE)

Books acquired by the Library 30.03.2003 - 30.06.2003

• GASKELL / Introduction to the thermodynamics of materials (50 GAS / 3)
• JONES / Principles and prevention of corrosion (43 JON)
• GIESE & VAN OSS / Colloid and surface properties of clays and related minerals (40 GIE)
• RICE / Ceramic fabrication technology (44 RIC / 2)
• KOCH / Nanostructured materials (40 KOC)
• WELKOWITZ, ET AL / Introductory statistics for the behavioural sciences (10 WEL)
• BRUNETTE ET AL / Titanium in medicine (45 BRU)
• MORTON / AVR an introductory course (12 MOR)
• CHRISTIAN / The theory of transformations in metals and alloys (53 CHR / 2a & 53 CHR / 2b)
• PUGH / The magic of a name, the Rolls Royce story part 3: a family of engines (16 PUG / c)
• ABRAHAM / Electrodeposition and characterisation of nanocrystalline nickel and nickel alloys (03 ABR)
• COCKFIELD / Twin-roll casting of aluminium eutectic alloys (03 COC / 6)
• FITZPATRICK & LODINI / Analysis of residual stress by diffraction using neutron and synchrotron radiation (31 FIT)
• ROYAL SOCIETY / Year book of the Royal Society 2001 (08 ROY / 2001)
• BOROVITSKAYA & SHUR (EDS) / Quantum dots (21 BOR)
• STRANG & McLEAN / Modelling of microstructural evolution in creep resistant materials (05 IOM / 1999)
• HEBEL / Exploring the nanophysics of condensed matter (58 HEB)
• MOYER & AYRES / Schaum's outline of theory and problems of trigonometry (x2) (10 MOY)
• BRONSON / Schaum's outline of theory and problems of differential equations (x2) (10 BRO)
• SPEIGEL & MOYER / Schaum's outline of theory and problems of college algebra (x2)(10 SPI / 2)
• CZYRSKA-FILEMONOWICZ / Proceedings of the IX conference on electron microscopy of Solids (05 CON 1996)
• JOHNSON / A shortcut through time (12 JOH)
• HONG ET AL / Modeling of casting and solidification processes 1991 (05 MOD 1991)
• MAZHAR ET AL / Advanced materials-2001 (05 AM 2001)
• SAHM ET AL / Modeling of casting, welding and advanced solidification processes-IX(05 UNI 2000)
• Education authorities directory 2003 (08 EAD 2003)
• Advanced materials-4 (05 JOI 1998)
• CRESSWELL ET AL / Product design: resistant materials technology (56 CRE)
• Intermetallics for the third millennium (05 ASM 1999)
• Proceedings of the 4th International Symposium on Metallic Multilayers (special issue of Journal of magnetism and magnetic materials) (05 INT 2001)
• SPEIGEL / Schaum's outline of theory and problems of complex variables (x2) (10 SPI / 3 & 3A)
• AYRES & SCHMIDT / Schaum's outline of theory and problems of college mathematics (x2) (10 AYR & AYR / A)
• WOAN / Cambridge handbook of physics formulas (20 WOA / A)
• CHAIKIN & LUBENSKY / Principles of condensed matter physics (20 CHA / 1)
• HUMPHREYS / Understanding materials: a festschrift for Sir Peter Hirsch (05 IOM 2002)
• ROSENBERG / The solid state (30 ROS)
• WILLS / Vector analysis with an introduction to tensor analysis (10 WIL)
• SELBY (ED) / CRC standard mathematical tables (10 SEL)
• OLSON & OWEN (EDS) / Martensite: a tribute to Morris Cohen (53 OLS / A)
• ALFORD / Russian English scientific and technical dictionary (06 ALF / b)
• DE BOER ET AL / Cohesion in metals: transition metal alloys (23 BOE / 1A)
• SUTTON & BALLUFFI / Interfaces in crystalline materials (30 SUT / A)
• SLATER & FRANK / Introduction to theoretical physics (20 SLA / 1 Closed access)
• GUGGENHEIM / Thermodynamics: an advanced treatment for chemists and physicists (40 GUG Closed access)
• BURINGTON / Mathematical tables and formulas (10 BUR)
• KHACHATURYAN / Theory of structural transformations in solids (53 KHA / A)
• COSSLETT / Modern microscopy (32 COS / 1)
• BELL / Coordinate solid geometry (10 BEL Closed access)
• MOTT & SNEDDON / Wave mechanics and its applications (20 MOT / 1 Closed access)
• CLARKE / A note book in pure mathematics (10 CLA)
• DUCASTELLE / Order and phase stability in alloys (23 DUC / A)
• NABARRO (ED) / Dislocations in solids (54 NAB / aA & 54 NAB / bA)
• WOOSTER / Tensors and group theory for the physical properties of crystals (30 WOO)
• CARMICHAEL & SMITH / Mathematical tables and formulas (11 CAR Closed access)
• HOUSTON / Principles of mathematical physics (10 HOU)
• LYUSTERNIK & YANPOL'SKII (EDS) / Mathematical analysis (10 LYU)
• WARLIMONT (ED) / Order-disorder transformations in alloys (53 WAR)
• KHAN & BRA (EDS) / Topics in physical metallurgy (50 KHA)
• BHADESHIA / Bainite in steels (50 BHA)
• YONGRUI / Martensitic transformation theory (53 YON)
• ANANTHARAMAN & SURYANARAYANA / Rapidly solidified metals (53 ANA)
• LYUBOV / Kinetic theory of phase transformations (53 LYU)
• REED-HILL ET AL (EDS) / Deformation twinning (05 AIME 1964)
• HERMAN (ED) / Advances in materials research, vol.5 (02 AMR / e)
• GIFKINS (ED) / Interfaces Conference (05 AIM 1969)
• ICOMAT 86 (05 ICOMAT 1986)
• ICOMAT 95 (05 ICOMAT 1995)
• ICOMAT 82 (05 ICOMAT 1982)
• ICOMAT 98 (05 ICOMAT 1998)

---

Books acquired by the Library 28.11.02 - 30.03.03

• DEE, K.C. ET AL An introduction to tissue-biomaterial interactions (45 DEE)
• KOCKS, U.F. ET AL Texture and anisotropy (30 KOC)
• KAWAZOE, Y. ET AL Clusters and nanomaterials (58 KAW)
• CHILTON/Experimental study and modelling of the cell-dendrite transition (03 CHI)
• ERLAT/Gas and water vapour permeation through thin oxide and oxynitride barrier films on polymer substrates (03 ERL)
• RANDLE & ENGLER/An introduction to texture analysis (30 RAN/1 & 30 RAN/1A)
• LESAR ET AL (EDS)/Annual review of materials research (02 ARMR/32)
• EHRENREICH & SPAEPEN (EDS)/Solid state physics, volume 57 (02 SSP/57)
• LIU ET AL (EDS)/High-temperature ordered intermetallic alloys III (05 MRS 1988/A)
• JOHNSON ET AL/ High-temperature ordered intermetallic alloys IV (05 MRS 1990/A)
• STRANG (ED)/Materials for high temperature power generation and process plant applications(05 IOM/A)
• BROWNE/Modelling columnar and equiaxed growth (03 BRO/2)
• LOZANO-PEREZ/TEM crack tip investigations of SCC D.Phil (03 LOZ)
• CANTOR ET EL/Aerospace materials (05 IP/2001 A)
• PARKER/An introduction to chemical metallurgy (40 PAR/1)
• LASKAR, ET AL/Diffusion in materials (05 ASI 1989)
• PETERS/Ferrous production metallurgy (51 PET)
• RUSSELL & VAUGHAN/Steel production (51 RUS)
• COUDURIER ET AL/Fundamentals of metallurgical processes (41 COU)
• OCKENDEN/Viscous flow (10 OCK)

---

Books acquired by the Library 01.11.02 - 28.11.02

• Allen & Tildesley Computer simulation of liquids 12 ALL
• Strang Materials for high temperature power generation and process plant applications 05 IOM
• Sonntag, et al Fundamentals of thermodynamics 20 SON
• Shin Prediction of microsegregation in multi-component alloys (D.Phil thesis) 03 SHI/5
• Gere Mechanics of materials 50 GER
• Buschow Handbook of magnetic materials 21 WOH/1

---

Books acquired by the Library 01.12.01 - 22.03.02

• WOLF, S. & TAUBER.R., Silicon processing for the VLSI era, vol. 1 21 WOL/1
• GERSTEIN, J. & SMITH, F., The physics and chemistry of materials (50GER/1)
• SCHNEIBL, J.H., High-temperature ordered intermetallic alloys IX (05 MRS/2000/646)
• SQUIRES, G.L., Practical physics (4th ed) (20 SQU/1)
• BRYDSON, R., Electron energy loss spectroscopy (32 BRY)
• STREETMAN,B.G., Solid state electronic devices (5th ed) 3 copies (21 STR/1B,C,D)
• BLACK, J., Biological performance of materials (3rd ed) (45 BLA)
• MARTIN, J., Materials for engineering (2nd ed) (50 MAR/3)
• SEED, G.M., Strength of materials. An undergraduate text. (50 SEE)
• BUCH, A. Short handbook of metal elements properties (04-1 BUC)
• PIETRZYK, M., Metal forming 2000 (Conf. proc.) (05 PIE/2000)
• NIINOMI, M., Structural biomaterials for the 21st century (Conf proc.) (05 TMS 2001/2)

---

Books acquired by the Library 01.09.01 - 01.12.01

• AARONSON, H.I., Lectures on the theory of phase transformations (53 AAR)
• MILLER, J.S., Magnetism : molecules to materials (21 MIL)
• CAHN, R.W., The coming of materials science (16 CAH)
• BORN & WOLF, Principles of optics, 7th expanded edition (20 BOR)
• CANTOR, B. ET AL, Aerospace Materials (05 Ox-Ko 1998)
• BUSCHOW, The Encyclopaedia of Materials and Technology (01 BUS)
• Solid State Physics : Advances in research and applications, vol.56 (02 SSP/56)
• BURKE, R., Project management. Planning and control techniques. (56 BUR/1, Lib. office)
• BAKER, S. & K., The complete idiot's guide to project management (56 BAK, Lib. office)
• REISS, G., Project management demystified. Today's tools and techniques (56 REI, Lib. Office)
• BENTLEY, J. et al. (eds) Advances in materials problem solving with the electron microscope (05 MRS/1999/5)

---

Acquisitions between 18.07.2001 - 30.08.2001

• MALLINSON, L.G., Ageing studies & lifetime extension of materials. Conf. Proc. (05 MAL)
• WOAN, G., The Cambridge handbook of physics formulas (04-1 WOA)
• STEVENS, M.P., Polymer chemistry: an introduction (45 STE)
• BOLTON, W., Engineering materials technology (50 BOL)
• PHILLIPS, R., Crystals, defects and microstructures (30 PHI)
• MIZUTANI, U., Introduction to the electron theory of metals (24 MIZ)
• HIGGINS, R.A., The properties of engineering materials. 2nd ed. (50 HIG)
• DAVIS, M., Scientific papers and presentations (04-1 DAV)
• DANN, S.E., Reactions and characterization of solids (40 DAN)
• YOO, H-I (ed.), Ceramic interfaces 2 (05 IOM 1998/1)
• CHAIKIN, P.M., Principles of condensed matter physics (20 CHA)
• HIGGINS, R.A., Materials for the engineering technician (50 HIG/2)
• FRANK, R., Understanding smart sensors (21 FRA/1)
• WILKINSON, D.S., Mass transport in solids and fluids (53 WIL)
• MENZEL, A., Photonics, Linear and nonlinear interactions of laser light and matter (34 MEN)
• HAMMOND, C., The basics of crystallography and diffraction (2nd ed.) (30 HAM/1)

---

Acquisitions between 01.05.2001 -18.07.2001.

• BUSCHOW, K.H.J., Handbook of magnetic materials. Vol. 13 (21WOH/k)
• HRYN, J.N., Magnesium technology 2001 (05 TMS 2001/1)
• KREYZIG, E., Advanced engineering mathematics (8th ed.) (Lib.office: 10 KRE/C)
• MILLER, M.K., Atom probe tomography. An analysis at the atomic level. (32 MIL/1C)
• HILLER, M., Phase equilibria, phase diagrams and phase transformations (40 HIL)
• ASHBY, M.F., Materials selection in mechanical design, 2nd ed. (Library office, 56 ASH/1A and Main lib. 56 ASH/1B))
• PUGH, P. The magic of a name. The Rolls-Royce story. 2 Vols. (16 PUG)
• BARNHAM and VVEDENSKY, Low-dimensional semicoductor structures (21 BAR)
• CHEREMISINOFF, N.P., Condensed encyclopedia of polymer engineering terms (01 CHE)

---

Acquisitions between 01.02.2001 -01.05.2001.

• RILEY ET AL., Mathematical methods for physics and engineering (Lib.office, 10 RIL)
• BUSCHOW, K.H.J., Handbook of magnetic materials, Vol. 12 (21 WOH/j)
• NIKOLAIDIS, N. 3-D image processing algorithms (12 NIK)
• IISI, World steel in figures (1999 and 2000 editions) (51 IISI)
• NGUYEN, T.Q., Flexible polymer chain dynamics in elongational flow (45 NGU)
• SHENOY, A.V., Rheology of filled polymer systens (45 SHE)
• CANHAM, L., Properties of porous silicon (21 CAN/A)
• MANZHELI, V.G., Handbook of binary solutions of cryocrystals (04-1 MAN)
• SHACKELFORD, J.F., CRC Materials science and engineering handbook (04-1 CRC 2000)
• AMM, Metal statistics 2000 (04-1 AMM 2000)
• The Education Authorities Directory and Annual 2001 (08 EAD 2001)

---

Acquisitions between 1.12.2000 - 31.01.2001.

• CROW, D.R. Principles and applications of electrochemistry (21 CRO)
• BIMBERG,D. Quantum dot heterostructures (22 BIM)
• JOHNSON,K.L. Contact mechanics (replacement copy) (Library Office, 54 JOH/B)
• MRS Proc. Vol. 571. Semiconductor quantum dots (05 MRS 1999/571)
• GOODHEW,P.J. ET AL, Electron microscopy and analysis (32 GOO/B; Lib.office, 32 GOO/A)
• JENKINS M.L., Characterization of radiation damage by transmission electron microscopy (In cataloguing)
• OSSWALD T.A., Materials science of polymers for engineers (45 OSS)
• BOUWMEESTER, D. The physics of quantum information (20 BOU)
• FOWLER, P.W., An atlas of Fullerenes (40 FOW)
• LOVETT, D.R., Tensor properties of crystals (2nd ed.) (Lib.office, 30 LOV)
• LUNN, G. Destruction of hazardous chemicals in the laboratory (ETB Room 30.18)
• FAULKNER and MARTIN, J., Dislocation theory for engineers:worked examples(In cataloguing)

---

Acquisitions between 1.11.2000 - 30.11.2000.

• ZIENKIEWICS, O.C. The finite element method. 3 vols. (5th ed) (10 ZIE/a-c)
• PILLING, M.J. Rection kinetics (40 PIL)
• RICHARDS, W.G. Energy levels in atoms and molecules (Oxford Chemistry Primers) (40 RIC)
• COMPTON R.G. Electrode potentials (Oxford Chemistry Primers) (40 COM)
• COX, B.G. Modern liquid phase kinetics (Oxford Chemistry Primers) (40 COX)
• RAUWENDAAL, C. Polymer extrusion (45 RAU)
• POCIUS, A.V. Adhesion and adhesives technology (40 POC)
• RAO, N. Design data for plastics engineers (45 RAO)
• STEINER, E. The chemistry maths book (10 STE/1)
• Solid State Physics, Vol.55 (2001) 02 SSP/55
• ATKINS, P.W. Physical chemistry (6th ed.)

---

Acquisitions between 1.8.2000 - 30.10.2000.

• RICE, R.W. Mechanical properties of ceramics and composites 44 RIC/1
• MEETHAM, G.W. Materials for high temperature engng applications 56 MEE
• GAVRILJUK, V.G. High nitrogen steels 51 GAV
• WILSON, A.J.C. International tables for crystallography, Vol.C. 11 IUC
• RAUWENDAAL, C. Understanding extrusion 34 RAU
• HIRSCH, P. Fracture, plastic flow and structural integrity 05 IOM/2000
• LEE, H-G. Chemical thermodynamics for metals and materials 40 LEE
• JANOCHA, H. Adaptronics and smart structures 58 JAN
• YANG, S. Physics and chemistry of nanostructured materials 40 YAN
• GRAHAM, D.T. Untangled web: developing teaching on the internet 12 GRA/1
• DOGGETT, G. Mathematics for chemistry 10 DOG
• MORTIMER, R.G. Mathematics for physical chemistry 10 MOR/1
• HARRISON, P. Quantum wells, wires and dots:theoretical 20 HAR
• EBEWELE, R.O. Polymer science and technology 45 EBE
• KNIGHT, H.J. Patent strategy for researchers and research managers 08 KNI
• BARRANTE, J.R. Applied mathematics for physical chemistry 10 BAR
• KAUFMANN, E.N. Annual review of materials science, v. 30 (2000) 02 ARMS/30
• BOWLEY, R. Introductory statistical mechanics (2nd ed.) 20 BOW
• VENABLES, J.A. Introduction to surface and thin film processes 40 VEN
• SCOTT, J.F. Ferroelectric memories 21 SCO
• WILSON, J. Optoelectronics, an introduction (3rd ed.) 21 WIL/B
• DAVIS, E.A. Science in the making. Vol.4: 1950-1998. 01 DAV